Films Protection Company is a manufacturer of Decorative Self Adhesive Film for indoor surface renewal, cabinet refacing, countertop visual refresh, door panel covering, and flat decorative panel applications. This category covers wood grain, marble, solid color, cabinet-facing, door-surface, and panel decoration finishes supplied as rolls or slit rolls for distributors, renovation contractors, cabinet workshops, retail display teams, and interior surface material suppliers.
Showing all 2 results
Decorative Self Adhesive Film renews smooth, sealed, dry indoor surfaces without replacing the board, cabinet, counter, or panel underneath. It is used when a surface needs a new visual finish, such as wood grain on cabinet doors, marble appearance on counters, matte color on wardrobes, or a coordinated finish on display panels.
This category should be selected by application surface, not by pattern alone. Cabinet and furniture surfaces usually require grain direction control, door-gap tolerance, handle-hole cutting, and stable edge trimming. Countertop and worktop surfaces need wider roll matching, seam planning, pattern continuity, and corner wrapping. A 200mm x 300mm sample on the real panel can be used to check air release, edge adhesion, wiping appearance, and flatness before approval.
The series below separate decorative film supply by surface type, finish, roll format, and installation requirement. This prevents the category from becoming a single furniture film or countertop film product description.
Product Series | Main Use | Selection Focus |
Wood Grain Decoration Series | Cabinets, wardrobes, desks, shelves, interior doors | Grain direction, color tone, retained finish sample |
Countertop Marble Finish Series | Kitchen counters, bathroom counters, reception desks, tabletops | Wider width, seam reduction, corner wrapping |
Cabinet Facing Series | Cabinet doors, drawer fronts, wardrobe panels | Handle-hole cutting, edge return, batch color consistency |
Flat Panel Decorative Series | Display panels, office panels, retail fixtures | Lighting reflection, flatness, trimming accuracy |
Sample and Trial Rolls | Project approval and distributor displays | Actual substrate test, color confirmation, repeat-order reference |
Start with the application surface. The film should be used on a clean, stable, smooth, sealed, dry indoor surface. Loose paint, oil, wax, dust, heavy texture, moisture, or cracks can reduce adhesive contact and cause edge lifting. For painted panels, laminated boards, sealed MDF, finished cabinet doors, and countertop surfaces, test the actual substrate before production.
Selection Comparison | Recommended Choice | Common Mis-selection Risk |
Cabinet doors and wardrobes | Wood grain or matte color, confirmed grain direction | Grain mismatch or color difference |
Countertops and desks | Marble or stone-look finish, wider roll width | Obvious seams or broken pattern continuity |
Retail display panels | Solid color, embossed texture, matte or semi-gloss finish | Reflection mismatch under store lighting |
Edge wrapping areas | 10mm-30mm return allowance confirmed by sample | Edge lifting from short return area |
Storage before installation | Dry indoor packaging without heavy pressure | Pressure marks, liner deformation, edge wave |
Repeat project supply | Keep approved sample, finish code, pattern direction, adhesive grade, and batch record | Later orders may show color variation or changed adhesive feel |
Furniture, cabinet, countertop, and panel surfaces may all use Decorative Self Adhesive Film, but they require different selection logic. Cabinet and furniture surfaces need stable grain direction, clean handle-hole cutting, door-gap tolerance, and controlled edge trimming. Countertop surfaces need attention to roll width, seam position, pattern continuity, corner wrapping, and wiping appearance. Display panels should be checked for reflection, flatness, and trimming accuracy under the intended lighting.
Item | Typical Range / Customizable Value |
Product category | Indoor decorative film for furniture, cabinets, countertops, doors, and panels |
Base material | PVC decorative film, grade-dependent thickness and finish structure |
Adhesive / structure | Pressure-sensitive adhesive, decorative surface layer, adhesive layer, release liner |
Thickness range | Approx. 0.08mm-0.30mm for common decorative grades |
Roll width / length | 45cm, 60cm, 90cm, 122cm / 10m, 25m, 50m, 100m |
Finish and pattern | Matte, glossy, embossed, wood grain, marble, stone, solid color, custom pattern |
Peel adhesion reference | Confirm by sample width, peel angle, dwell time, test panel, pressure, and surface condition |
Sample test size | 200mm x 300mm or larger actual-panel sample before bulk approval |
Application check | Actual substrate test with squeegee pressing, manual trimming, edge adhesion, and liner release |
Edge wrapping allowance | Typically confirm 10mm-30mm return allowance by corner shape and panel thickness |
Batch and storage control | Approved sample, adhesive grade, retained batch sample, dry storage, liner condition |
Custom production should be discussed by series, finish, roll size, adhesive requirement, and application surface. Films Protection Company can support wood grain pattern selection, marble-look width matching, cabinet color approval, OEM color matching, custom roll width, slit roll format, private-label packaging, MOQ by pattern and width, and sample rolls.
For repeat orders, retain the approved sample with batch number, pattern direction, surface finish, roll width, adhesive grade, and packaging format. Countertop surfaces should be reviewed for seam visibility and pattern continuity with the actual size. Cabinet work should confirm door gaps, handle holes, edge-return allowance, and corner radius before cutting.
Before decorative self adhesive film is approved for panels, cabinets, or countertops, check installation conditions as carefully as the finish. The substrate should be smooth, sealed, clean, dry, and free from loose paint, oil, dust, wax, moisture, or deep damage. During sample validation, review air release, edge adhesion after pressing, corner wrapping stability, wiping appearance, and any pressure mark or liner deformation after storage.
Select by application surface, finish, and roll format. Cabinet and furniture areas need pattern direction and edge trimming control. Countertop areas need wider rolls. Display panels should be checked for reflection, flatness, and trimming accuracy.
Confirm material, finish, thickness, roll width, roll length, adhesive tack, liner, pattern direction, color reference, packing, sample approval, cutting loss, edge-return allowance, substrate test, and retained sample record.
The surface should be smooth, sealed, dry, clean, and stable, without loose coating, oil, wax, dust, cracks, rough texture, or moisture. An actual substrate test is recommended before bulk supply.
MOQ can be discussed by color, pattern, width, roll length, finish, and packaging. For repeat orders, keep the approved sample, batch record, pattern direction, adhesive grade, color reference, and storage condition.
