Films Protection Company is a manufacturer of non adhesive clear film for glue-free surface protection on smooth plastic and glass surfaces. This range covers clear PE electrostatic film, static cling protection film, and non adhesive tape film for acrylic, PC, PVC, PETG, glass, and polished plastic sheet handling. It is made for short-term covering, clean transfer, stacking separation, and inspection where residue, ghosting, haze marks, or coating reaction must be avoided.
Showing the single result
Non adhesive clear film is used when a transparent sheet or glass surface needs temporary protection, but a traditional glue layer is not acceptable. It performs best on clean, dry, flat, glossy, low-texture surfaces such as acrylic, PMMA, PC, PVC, PETG, glass, and polished plastic sheet.
The value is clean contact, not aggressive bonding. Before regular use, test it on the actual surface, especially on hard-coated, printed, anti-scratch, or warm extruded sheets. A room-temperature test plus a 60-70 C for 48h storage check helps confirm removal behavior, edge stability, and pressure marks.
Films Protection Company supplies non adhesive clear film for plastic sheet covering, PE electrostatic film for smooth panel handling, static cling clear film for glass and polished surfaces, and non adhesive tape film for edge or small-area protection. Full-width rolls suit extrusion transfer, slit rolls fit narrow panels, and sheeted film suits fixed-size packaging. This range is not for construction floor covering, metal stamping protection, PET optical film, heat transfer film, or screen protector material.
Film structure | When to choose | Suitable surface | Main risk if misused |
Non adhesive tape film / glue-free clear film | Short-term covering, clean handling, stacking separation | Acrylic, PMMA, PC, PVC, PETG, glass | Edge lifting on rough, dusty, oily, curved, or outdoor surfaces |
Low tack surface protection film | Light fixation during cutting, routing, or vertical handling | Smooth plastic sheet, coated panel, glossy board | Tack may still be too high for strict no-glue needs |
Self adhesive protective film structure | Stronger holding for longer transport or difficult surfaces | Surfaces not suited to static cling or glue-free contact | Higher residue, ghosting, haze marks, or coating reaction risk |
Non adhesive clear film should be tested under real workshop handling. Apply it to acrylic, PC, PVC, PETG, glass, or polished plastic sheet, then check the surface after stacking, cutting, storage, and removal. Key inspection points include edge lifting, haze marks, static dust attraction, trapped particles, pressure marks, and residue. If dust is trapped during stacking, pressure may leave local marks even without glue.
Item | Typical Range / Customizable Value |
Product category | Non adhesive clear film, PE electrostatic film, static cling clear film, non adhesive tape film |
Base material | PE, LDPE, co-extruded PE, static cling clear film |
Structure | No adhesive coating, electrostatic cling, co-extruded tacky layer |
Thickness | 20-200 um, common range 25-80 um |
Width | 20-2200 mm, custom slit width available |
Roll length | 50-4000 m, adjusted by thickness and roll diameter |
Color and clarity | Clear, blue tint, milky white, black-white, printed color |
Suitable surfaces | Acrylic, PMMA, PC, PVC, PETG, glass, polished plastic sheet |
Test reference | Room storage test, 60-70 C for 48h check, residue inspection |
Rejection checks | Edge lifting, haze mark, static dust, trapped particle, pressure mark, visible stain |
Processing / supply | Slitting, perforation, printing, reverse winding, sheet cutting, jumbo roll, slit roll |
For bulk projects, Films Protection Company confirms the protected surface before recommending thickness, cling level, and roll format. Useful details include surface material, coating condition, sheet temperature after extrusion, cooling time, storage time, removal timing, width, printed marks, perforation, and winding direction. Slit tolerance, winding tension, roll flatness, and core strength also matter because uneven rolls may cause wrinkles, loose edges, or contact marks.
A no adhesive structure should be used when residue control is more important than holding strength. It fits clean sheet handling, short-term covering, interlayer separation, and transparent surfaces where adhesive marks may cause rejection. Low tack surface protection film is better when light fixation is needed during routing, cutting, or vertical movement. If the surface cannot rely on static cling, flat contact, or short handling time, an adhesive-coated structure may be safer but must be tested on coated and polished sheets.
Yes. It works when the surface is clean, smooth, dry, and flat. Coated sheets should still be tested.
Non adhesive film has no traditional glue coating and focuses on clean removal. Low tack film adds light adhesive force for process stability.
Yes. It suits glass, polished acrylic, PC, PVC, PETG, and similar smooth surfaces. Dusty, rough, oily, curved, or outdoor surfaces need testing.
Confirm surface material, coating type, protection time, storage temperature, cooling time, width, thickness, removal method, printing needs, winding direction, and residue test conditions.
