No products were found matching your selection.
Other Related Products
-
PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.
-
Polyester film water absorption is the percentage mass increase of a PET specimen after controlled water exposure. This TDS covers bare, treated, coated, and adhesive-backed PET constructions. Interpret results with thickness, conditioning, water temperature, exposure duration, and construction. Reference data can screen materials, but confirm the actual grade and finished structure by representative testing.
-
- Thickness: 100um / 0.1mm / approx. 4 mil
- Material: PET polyester film roll
- Color: Clear standard, other finishes on request
- Surface: Untreated, one-side corona, or two-side corona
- Roll format: Custom width, length, 76mm or 152mm core ID, roll OD
- Uses: Die-cutting, insulation parts, labels, adhesive coating, lamination
-
- Common widths:24 in, 36 in, 48 in, or custom roll width
- Common length:200 ft per roll, custom length available
- Film material:PE / LDPE temporary closure film
- Adhesive:water-based acrylic adhesive, medium tack or high tack
- Color options:blue for visibility, clear for inspection
- Use area:open ductwork, air duct, vent opening, and HVAC fixture protection
-
- Material: PE film
- Adhesive: removable self-adhesive coating
- Common Colors: blue, clear, printed
- Common Widths: 24 in, 36 in, 48 in, 600 mm
- Common Roll Lengths: 200 ft, 500 ft, custom
- Typical Use: temporary protection for sealed hard floors
-
- Material: clear PET / BOPET polyester film
- Color: transparent clear, light tint by request
- Thickness: 25-250um typical factory range
- Function: anti static surface charge control
- Supply form: slit roll or cut sheet
- Use: electronic, optical, and clean converting
-
- Thickness: 250um / 0.25mm for rigid support parts
- Material: PET polyester film with insulating properties
- Color Options: Clear, translucent, milky white, black or custom color
- Surface: Smooth, flat surface with low-curl control
- Processing: Slitting, sheeting, punching, cutting and die-cutting
- Main Uses: Insulation gasket, spacer layer, washer and panel backing
-
- Material: PE-based removable protective film
- Color: Clear, blue, white or custom
- Thickness: 30-120 um typical range
- Width: 20-2200 mm customizable
- Adhesive: Acrylic or rubber-based pressure-sensitive adhesive
- Use: Plastic sheet and formed part protection
-
- Material: PE film with pressure-sensitive adhesive
- Adhesion: Low tack, medium tack, or custom
- Color: Clear, blue, or milky translucent
- Thickness: Standard and custom options
- Width: Slit rolls and sheet sizes
- Use: Temporary screen protection
