No products were found matching your selection.
Other Related Products
-
Laser cutting stainless steel with film is most reliable when the protective layer, stainless steel finish, lamination method, laser process, part geometry, and removal timing are validated as one system. This guide addresses bubbling at pierce points, lifting along cut paths, film shrinkage, surface contamination, scratches, adhesive transfer, and difficult removal on 2B, BA, mirror, brushed, hairline, and coated stainless steel. It is intended for sheet-metal processing where the film remains on the plate during cutting and may continue through bending, stacking, storage, or transport. The main acceptance test is a production-representative trial on the actual surface, machine, and removal schedule.
-
- Material: PVC decorative vinyl with adhesive backing
- Finish: wood grain, matte, gloss, high gloss, solid color
- Width: 600mm, 1220mm, 1240mm, or custom
- Roll length: 30m, 50m, 100m, or bulk roll
- Surfaces: sealed MDF, laminated board, plywood, painted furniture panels
- Supply: roll, cut sheet, sample swatch, color-matched batch
-
PET film chemical resistance describes how an uncoated polyester carrier or a complete coated, adhesive-backed or laminated construction responds to controlled contact with acids, alkalis, solvents, cleaners and process fluids. This technical reference connects film structure, exposure conditions, mechanical and optical checks, peel behaviour and failure observations. Published data can support initial screening, but the supplied grade, actual chemical formulation, protected surface and intended dwell condition should be confirmed by sample testing. Chemical exposure data should not be treated as a penetration limit; evaluate localized loading separately with the PET film puncture resistance technical data.
-
- Material: PET film
- Finish: clear gloss / matte / anti-glare
- Typical thickness: 100–250 microns
- Surface option: hard coat / anti-fingerprint
- Supply form: rolls, sheets, die-cut pieces
- Adhesive option: removable or application-matched adhesive
-
- Material: PE-based removable protective film
- Color: Clear, blue, white or custom
- Thickness: 30-120 um typical range
- Width: 20-2200 mm customizable
- Adhesive: Acrylic or rubber-based pressure-sensitive adhesive
- Use: Plastic sheet and formed part protection
-
- Material: Optical PET or flexible film structure
- Common thickness: 0.10 mm to 0.18 mm
- Color: Clear transparent
- Surface: Glossy, anti-scratch coating optional
- Adhesive: Silicone or pressure-sensitive adhesive
- Supply form: Roll, sheet, or die-cut pieces
-
- Material: PE surface protection film
- Adhesive: acrylic-based or rubber-based
- Color options: clear, blue, black/white, custom print
- Thickness range: 30–120 microns
- Roll width: up to 3200 mm
- Surface fit: gloss, matte, satin, and lightly textured coatings
-
PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.
-
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Thickness: 30–150 microns
- Colors: clear, blue, white, black-and-white
- Width: up to 2000 mm
- Surface fit: glossy, matte, textured, coated sheets
