No products were found matching your selection.
Other Related Products
-
PET film chemical resistance describes how an uncoated polyester carrier or a complete coated, adhesive-backed or laminated construction responds to controlled contact with acids, alkalis, solvents, cleaners and process fluids. This technical reference connects film structure, exposure conditions, mechanical and optical checks, peel behaviour and failure observations. Published data can support initial screening, but the supplied grade, actual chemical formulation, protected surface and intended dwell condition should be confirmed by sample testing. Chemical exposure data should not be treated as a penetration limit; evaluate localized loading separately with the PET film puncture resistance technical data.
-
- Material: PET film
- Finish: clear gloss / matte / anti-glare
- Typical thickness: 100–250 microns
- Surface option: hard coat / anti-fingerprint
- Supply form: rolls, sheets, die-cut pieces
- Adhesive option: removable or application-matched adhesive
-
- Material: PE / LDPE based anti-static film
- Appearance: clear or pink tinted
- Typical thickness: 1 mil to 6 mil
- Supply form: rolls, sheets, liners, tubing, bag stock
- Processing: heat sealable on suitable grades
- Main use: electronics packaging and clean handling
-
Protective film for painted sheet goods should be selected around the full processing route, not from film thickness or initial tack alone. Pre-painted steel, coated aluminum, PCM/VCM panels, roofing sheet, cladding and other finished metal can be exposed to scratches, trapped particles, edge lifting, wrinkles, adhesive transfer and visible surface marking during slitting, punching, bending, roll forming, stamping, storage and shipment. A reliable approval plan starts with the actual coating and finish, then checks application conditions, deformation severity, dwell time and removal stage. Sample testing and a production-representative trial are recommended before full use.
-
Carpet protection during construction should be managed as a jobsite process, not a simple covering task. It applies when installed carpet remains during fit-out, painting, punch-list work, furniture installation, or repeated trade traffic. Key risks are embedded grit, spills, edge lifting, wrinkles, puncture, adhesion growth, adhesive transfer, and fiber disturbance. Selection should reflect carpet construction, cleanliness, traffic, planned dwell, environment, application method, and an actual-carpet trial.
-
- Material: PET material / polyester film
- Common thickness: 25 um-250 um
- Color: clear, matte, translucent, milky white
- Surface: untreated, corona treated, primer treated
- Processing: insulation, printing, lamination, die cutting
- Key properties: thermal stability, dimensional stability
-
- Thickness:125um / 0.125mm / 5 mil
- Material:Biaxially oriented PET film
- Surface:Clear, matte, treated, or coating-ready
- Format:Roll, slit roll, or sheet
- Processing:Printing, lamination, punching, die cutting
- Use:Overlay, insulation, spacer, carrier layer
-
- Material: PE film with pressure-sensitive adhesive
- Thickness: 30 um-120 um, selected by process risk
- Width: 50 mm-1600 mm, custom slitting available
- Roll length: 100 m-1000 m, grade dependent
- Surfaces: coated metal, stainless steel, aluminum
- Use: fabrication, forming, assembly, stacking, internal transport
-
- Material: PET film with double side silicone coating
- Typical Thickness: 25 um, 36 um, 50 um, 75 um, 100 um
- Color Options: Clear, milky white, blue, red, or matte finish
- Release Design: Equal release or differential release liner
- Common Width: 300-1600 mm, slit roll available
- Main Use: Tape, label stock, foam tape, and die-cut liner
