No products were found matching your selection.

Other Related Products

  • UV Protection PET Film

    • Material: clear PET film
    • Structure: PET with PSA
    • Color: clear or light anti-glare
    • Thickness: 25-125 um PET base
    • Supply: rolls or slit rolls
    • Use: printed and display surfaces
    Read moreDone

  • Chemical Coated PET Film

    • Material: Chemical coated BOPET / PET film
    • Color: Clear transparent
    • Coating side: One-side, two-side, or coated plus corona treated
    • Thickness: 12-250 um
    • Supply form: Jumbo roll, slit roll, or sheet
    • Uses: Printing, coating, lamination, metallizing, label stock
    Read moreDone

  • Protective Film For Plastic Sheet

    • Material: PE protective film
    • Adhesive: acrylic pressure-sensitive adhesive
    • Thickness: 30–150 microns
    • Colors: clear, blue, white, black-and-white
    • Width: up to 2000 mm
    • Surface fit: glossy, matte, textured, coated sheets
    Read moreDone
  • Placeholder

    Laser Cut Protective Film

    • Material: PE film with removable adhesive
    • Color: Black/white, transparent, blue, or printed
    • Thickness: Typical 60-100 um
    • Adhesion: 1.8-5.5 N/25 mm typical range
    • Roll format: Slit rolls for sheet lamination
    • Suitable surface: Stainless steel, coated metal, aluminum sheet
    Read moreDone

  • Protective Film Solutions for Pre-Painted Sheet Processing

    Protective film for painted sheet goods should be selected around the full processing route, not from film thickness or initial tack alone. Pre-painted steel, coated aluminum, PCM/VCM panels, roofing sheet, cladding and other finished metal can be exposed to scratches, trapped particles, edge lifting, wrinkles, adhesive transfer and visible surface marking during slitting, punching, bending, roll forming, stamping, storage and shipment. A reliable approval plan starts with the actual coating and finish, then checks application conditions, deformation severity, dwell time and removal stage. Sample testing and a production-representative trial are recommended before full use.

    Read moreDone

  • Adhesive Backed Polyester Film

    • Material: PET polyester film with pressure-sensitive adhesive
    • Typical film thickness: 25 / 36 / 50 / 75 / 100 microns
    • Adhesive options: acrylic or silicone
    • Color options: clear, blue, milky, matte black, or custom
    • Supply form: log rolls, slit rolls, sheets, or die-cut pieces
    • Common uses: insulation, masking, surface protection, lamination, and converting
    Read moreDone

  • Clear Polyester Film For Sublimation

    • Material: Clear PET polyester film
    • Surface: Printable receiving coating
    • Finish: Clear, semi-matte, or matte
    • Thickness: 50um, 75um, 100um typical
    • Roll Core: 3 inch or 6 inch core
    • Use: Sublimation printing and transfer testing
    Read moreDone

  • PET Film Puncture Resistance Technical Data

    PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.

    Read moreDone

  • Aluminum Composite Panel Protection Film

    • Material: PE film
    • Adhesive: acrylic-based
    • Colors: clear, blue, white, black & white
    • Thickness: 30–80 mic typical
    • Width: 1000–1500 mm common
    • Use: processing to installation
    Read moreDone