No products were found matching your selection.
Other Related Products
-
Polyester film chemical resistance depends on the tested film construction, chemical concentration, contact temperature, exposure time, and applied stress. This technical data supports bare BOPET, surface-treated PET, and adhesive-backed protective film used on glass, metal, plastic, painted, or coated surfaces. Reference values help define a test plan, while the actual chemical, surface, dwell period, and removal behavior should be confirmed through representative sample testing before full use.
-
- Material: clear PET / BOPET polyester film
- Color: transparent clear, light tint by request
- Thickness: 25-250um typical factory range
- Function: anti static surface charge control
- Supply form: slit roll or cut sheet
- Use: electronic, optical, and clean converting
-
PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.
-
Protective lens film for spray booths is used as a replaceable transparent layer over a viewing window so paint overspray, dry spray, dust, and routine wiping contact the film before they reach the clear substrate. This guide is intended for glass, coated glass, acrylic, and polycarbonate observation panels used in automotive refinishing and industrial coating areas. The main risks are reduced visibility, trapped contamination, edge lifting, adhesive transfer, film tearing, and an unverified removal interval. Selection should be based on the actual window material, coating condition, optical requirement, booth temperature, cleaning method, vertical holding need, and a sample test that continues through the planned service period.
-
- Material: PE or PET-based
- Color: Clear, blue, or milky white
- Adhesion: Low to medium tack
- Thickness: 30–100 microns
- Supply Form: Roll, sheet, slit roll, or die-cut
- Use Stage: Printing to final assembly
-
- Material: Clear PET film with non-silicone release coating
- Release side: Single side release surface
- Color: Transparent or light haze visual grade
- Thickness: 25 um, 36 um, 50 um, 75 um, 100 um
- Supply form: Clear release film roll or sheet supply
- Typical use: Electronics adhesive release liner, clean interleaf, transparent laminate support
-
- Material: PE surface protection film
- Adhesive: acrylic-based or rubber-based
- Color options: clear, blue, black/white, custom print
- Thickness range: 30–120 microns
- Roll width: up to 3200 mm
- Surface fit: gloss, matte, satin, and lightly textured coatings
-
- Material: Clear PET carrier
- Thickness: 50um, 75um, 100um
- Finish: Matte, semi-matte, glossy
- Peel type: Hot peel, cold peel
- Use: Textile logo transfer
- Supply: Rolls or sheets
-
- Thickness: 100um / 0.1mm / approx. 4 mil
- Material: PET polyester film roll
- Color: Clear standard, other finishes on request
- Surface: Untreated, one-side corona, or two-side corona
- Roll format: Custom width, length, 76mm or 152mm core ID, roll OD
- Uses: Die-cutting, insulation parts, labels, adhesive coating, lamination
