Protective film for painted sheet goods should be selected around the full processing route, not from film thickness or initial tack alone. Pre-painted steel, coated aluminum, PCM/VCM panels, roofing sheet, cladding and other finished metal can be exposed to scratches, trapped particles, edge lifting, wrinkles, adhesive transfer and visible surface marking during slitting, punching, bending, roll forming, stamping, storage and shipment. A reliable approval plan starts with the actual coating and finish, then checks application conditions, deformation severity, dwell time and removal stage. Sample testing and a production-representative trial are recommended before full use.
Polyester film chemical resistance depends on the tested film construction, chemical concentration, contact temperature, exposure time, and applied stress. This technical data supports bare BOPET, surface-treated PET, and adhesive-backed protective film used on glass, metal, plastic, painted, or coated surfaces. Reference values help define a test plan, while the actual chemical, surface, dwell period, and removal behavior should be confirmed through representative sample testing before full use.
Polyester film water absorption is the percentage mass increase of a PET specimen after controlled water exposure. This TDS covers bare, treated, coated, and adhesive-backed PET constructions. Interpret results with thickness, conditioning, water temperature, exposure duration, and construction. Reference data can screen materials, but confirm the actual grade and finished structure by representative testing.
