No products were found matching your selection.
Other Related Products
-
- Material: PE / LDPE based anti-static film
- Appearance: clear or pink tinted
- Typical thickness: 1 mil to 6 mil
- Supply form: rolls, sheets, liners, tubing, bag stock
- Processing: heat sealable on suitable grades
- Main use: electronics packaging and clean handling
-
- Material: PET polyester film
- Thickness: custom industrial gauges
- Roll type: jumbo roll, master roll, slit roll
- Surface: untreated, single corona, double corona
- Finish: clear, white, black, matte, gloss
- Processing: slitting, rewinding, sheeting
-
- Material: printed self adhesive PVC film with release liner.
- Width: 600 mm, 900 mm, 1220 mm, or custom slit width.
- Length: 10 m, 25 m, 50 m, or project roll format.
- Finish: glossy, satin matte, or soft stone texture.
- Pattern: white grey, black gold, beige stone, or custom veining.
- Surface: dry, flat, sealed and non-porous counter surfaces.
-
Polyester film chemical resistance depends on the tested film construction, chemical concentration, contact temperature, exposure time, and applied stress. This technical data supports bare BOPET, surface-treated PET, and adhesive-backed protective film used on glass, metal, plastic, painted, or coated surfaces. Reference values help define a test plan, while the actual chemical, surface, dwell period, and removal behavior should be confirmed through representative sample testing before full use.
-
- Product Type: Optical-grade OCA bonding film
- Adhesive Layer: Clear double sided adhesive layer
- Common Thickness: 50um, 100um, 125um, 175um, 250um
- Appearance: Transparent, low haze, high clarity
- Liner: PET release liner, easy release and tight release options
- Main Use: Display bonding, glass bonding, optical component assembly
-
Protective lens film for spray booths is used as a replaceable transparent layer over a viewing window so paint overspray, dry spray, dust, and routine wiping contact the film before they reach the clear substrate. This guide is intended for glass, coated glass, acrylic, and polycarbonate observation panels used in automotive refinishing and industrial coating areas. The main risks are reduced visibility, trapped contamination, edge lifting, adhesive transfer, film tearing, and an unverified removal interval. Selection should be based on the actual window material, coating condition, optical requirement, booth temperature, cleaning method, vertical holding need, and a sample test that continues through the planned service period.
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40 / 50 / 60 / 70 / 80 microns
- Adhesive: Water-based acrylic
- Width: 100–1240 mm
- Surface Match: Gloss, semi-gloss, smooth, lightly textured
-
PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.
-
- Material: PE film
- Adhesive: removable self-adhesive coating
- Common Colors: blue, clear, printed
- Common Widths: 24 in, 36 in, 48 in, 600 mm
- Common Roll Lengths: 200 ft, 500 ft, custom
- Typical Use: temporary protection for sealed hard floors
