No products were found matching your selection.

Other Related Products

  • Aluminum Composite Panel Protection Film

    • Material: PE film
    • Adhesive: acrylic-based
    • Colors: clear, blue, white, black & white
    • Thickness: 30–80 mic typical
    • Width: 1000–1500 mm common
    • Use: processing to installation
    Read moreDone

  • Protective Film Solutions for Pre-Painted Sheet Processing

    Protective film for painted sheet goods should be selected around the full processing route, not from film thickness or initial tack alone. Pre-painted steel, coated aluminum, PCM/VCM panels, roofing sheet, cladding and other finished metal can be exposed to scratches, trapped particles, edge lifting, wrinkles, adhesive transfer and visible surface marking during slitting, punching, bending, roll forming, stamping, storage and shipment. A reliable approval plan starts with the actual coating and finish, then checks application conditions, deformation severity, dwell time and removal stage. Sample testing and a production-representative trial are recommended before full use.

    Read moreDone

  • Red Transparent Plastic Film

    • Material:Red transparent PET film or red transparent PVC film
    • Color Density:Light red, standard red, deep red, or sample-matched tone
    • Thickness:PET 25 um – 250 um / PVC 100 um – 500 um typical
    • Light Transmission:Light red 55% – 78% / deep red 18% – 45% typical
    • Surface:Smooth roll surface for printing, lamination, slitting, or die-cutting
    • Uses:Packaging window, lighting filter, display overlay, LED window, visual identification
    Read moreDone

  • PET Plastic Sheet Roll

    • Material: APET / RPET
    • Color: clear, translucent, tinted
    • Surface: glossy, smooth
    • Supply form: roll stock
    • Thickness: custom production range
    • Typical use: thermoforming and packaging conversion
    Read moreDone

  • 100 Micron PET Film

    • Thickness: 100um / 0.1mm / approx. 4 mil
    • Material: PET polyester film roll
    • Color: Clear standard, other finishes on request
    • Surface: Untreated, one-side corona, or two-side corona
    • Roll format: Custom width, length, 76mm or 152mm core ID, roll OD
    • Uses: Die-cutting, insulation parts, labels, adhesive coating, lamination
    Read moreDone

  • Self Adhesive Furniture Film

    • Material: PVC decorative vinyl with adhesive backing
    • Finish: wood grain, matte, gloss, high gloss, solid color
    • Width: 600mm, 1220mm, 1240mm, or custom
    • Roll length: 30m, 50m, 100m, or bulk roll
    • Surfaces: sealed MDF, laminated board, plywood, painted furniture panels
    • Supply: roll, cut sheet, sample swatch, color-matched batch
    Read moreDone

  • Laser Cutting Stainless Steel With Protective Film: Adhesion and Cut Quality Solution

    Laser cutting stainless steel with film is most reliable when the protective layer, stainless steel finish, lamination method, laser process, part geometry, and removal timing are validated as one system. This guide addresses bubbling at pierce points, lifting along cut paths, film shrinkage, surface contamination, scratches, adhesive transfer, and difficult removal on 2B, BA, mirror, brushed, hairline, and coated stainless steel. It is intended for sheet-metal processing where the film remains on the plate during cutting and may continue through bending, stacking, storage, or transport. The main acceptance test is a production-representative trial on the actual surface, machine, and removal schedule.

    Read moreDone

  • Double Side Release Coated PET Film

    • Material: PET film with double side silicone coating
    • Typical Thickness: 25 um, 36 um, 50 um, 75 um, 100 um
    • Color Options: Clear, milky white, blue, red, or matte finish
    • Release Design: Equal release or differential release liner
    • Common Width: 300-1600 mm, slit roll available
    • Main Use: Tape, label stock, foam tape, and die-cut liner
    Read moreDone

  • Protective Film For Deep Drawing

    • Material: PE or polyolefin forming-grade film
    • Thickness: 50 um-100 um typical
    • Color: Blue, clear, white, or black-white
    • Adhesive: Removable acrylic or rubber-based adhesive
    • Process: Deep drawing, stamping, forming
    • Use: Metal sheet, appliance, automotive, kitchenware parts
    Read moreDone