No products were found matching your selection.
Other Related Products
-
PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.
-
- Thickness:125um / 0.125mm / 5 mil
- Material:Biaxially oriented PET film
- Surface:Clear, matte, treated, or coating-ready
- Format:Roll, slit roll, or sheet
- Processing:Printing, lamination, punching, die cutting
- Use:Overlay, insulation, spacer, carrier layer
-
Polyester film water absorption is the percentage mass increase of a PET specimen after controlled water exposure. This TDS covers bare, treated, coated, and adhesive-backed PET constructions. Interpret results with thickness, conditioning, water temperature, exposure duration, and construction. Reference data can screen materials, but confirm the actual grade and finished structure by representative testing.
-
- Material: Clear PET polyester film
- Surface: Printable receiving coating
- Finish: Clear, semi-matte, or matte
- Thickness: 50um, 75um, 100um typical
- Roll Core: 3 inch or 6 inch core
- Use: Sublimation printing and transfer testing
-
- Material: PE film
- Adhesive: acrylic-based
- Colors: clear, blue, white, black & white
- Thickness: 30–80 mic typical
- Width: 1000–1500 mm common
- Use: processing to installation
-
- Material: PE / LDPE based anti-static film
- Appearance: clear or pink tinted
- Typical thickness: 1 mil to 6 mil
- Supply form: rolls, sheets, liners, tubing, bag stock
- Processing: heat sealable on suitable grades
- Main use: electronics packaging and clean handling
-
- Material: PE film with removable adhesive
- Color: Clear, blue, white, black-white, or printed
- Thickness: 30-100 um, typical factory test range
- Adhesive: Low or medium tack pressure-sensitive adhesive
- Width: Custom slit width, +/-1 mm typical tolerance
- Surface Use: Stainless steel, PCM/VCM, glass, and plastic panels
-
- Material: PE surface protection film
- Adhesive: acrylic-based or rubber-based
- Color options: clear, blue, black/white, custom print
- Thickness range: 30–120 microns
- Roll width: up to 3200 mm
- Surface fit: gloss, matte, satin, and lightly textured coatings
-
- Material: APET / RPET
- Color: clear, translucent, tinted
- Surface: glossy, smooth
- Supply form: roll stock
- Thickness: custom production range
- Typical use: thermoforming and packaging conversion
