No products were found matching your selection.

Other Related Products

  • Surface Guard Protective Film

    • Material: PE protective film
    • Color: Clear, blue, black & white
    • Thickness: 40 / 50 / 60 / 70 / 80 microns
    • Adhesive: Water-based acrylic
    • Width: 100–1240 mm
    • Surface Match: Gloss, semi-gloss, smooth, lightly textured
    Read moreDone

  • Clear Polyester Film For Sublimation

    • Material: Clear PET polyester film
    • Surface: Printable receiving coating
    • Finish: Clear, semi-matte, or matte
    • Thickness: 50um, 75um, 100um typical
    • Roll Core: 3 inch or 6 inch core
    • Use: Sublimation printing and transfer testing
    Read moreDone

  • Heat Transfer Clear PET Release Film

    • Material: Clear PET carrier
    • Thickness: 50um, 75um, 100um
    • Finish: Matte, semi-matte, glossy
    • Peel type: Hot peel, cold peel
    • Use: Textile logo transfer
    • Supply: Rolls or sheets
    Read moreDone

  • Perforated Surface Protection Film

    • Common roll width: 300 mm, 600 mm, 1000 mm, 1220 mm, 1650 mm
    • Film thickness: 40 um-100 um
    • Color options: Clear, blue, white, black-white, or printed marks
    • Material: PE film with controlled hand-tear perforation
    • Tear-off interval: 300 mm, 500 mm, 600 mm, 1000 mm, or custom
    • Main use: Fast temporary covering for floors, counters, doors, windows, and duct openings
    Read moreDone

  • Laser Cutting Stainless Steel With Protective Film: Adhesion and Cut Quality Solution

    Laser cutting stainless steel with film is most reliable when the protective layer, stainless steel finish, lamination method, laser process, part geometry, and removal timing are validated as one system. This guide addresses bubbling at pierce points, lifting along cut paths, film shrinkage, surface contamination, scratches, adhesive transfer, and difficult removal on 2B, BA, mirror, brushed, hairline, and coated stainless steel. It is intended for sheet-metal processing where the film remains on the plate during cutting and may continue through bending, stacking, storage, or transport. The main acceptance test is a production-representative trial on the actual surface, machine, and removal schedule.

    Read moreDone

  • Clear Protective Film For Cell Phones

    • Material: Optical PET or flexible film structure
    • Common thickness: 0.10 mm to 0.18 mm
    • Color: Clear transparent
    • Surface: Glossy, anti-scratch coating optional
    • Adhesive: Silicone or pressure-sensitive adhesive
    • Supply form: Roll, sheet, or die-cut pieces
    Read moreDone

  • Polyester Film Chemical Resistance Technical Data

    Polyester film chemical resistance depends on the tested film construction, chemical concentration, contact temperature, exposure time, and applied stress. This technical data supports bare BOPET, surface-treated PET, and adhesive-backed protective film used on glass, metal, plastic, painted, or coated surfaces. Reference values help define a test plan, while the actual chemical, surface, dwell period, and removal behavior should be confirmed through representative sample testing before full use.

    Read moreDone

  • Optically Clear Double Sided Adhesive Film

    • Product Type: Optical-grade OCA bonding film
    • Adhesive Layer: Clear double sided adhesive layer
    • Common Thickness: 50um, 100um, 125um, 175um, 250um
    • Appearance: Transparent, low haze, high clarity
    • Liner: PET release liner, easy release and tight release options
    • Main Use: Display bonding, glass bonding, optical component assembly
    Read moreDone

  • 125 Micron Polyester Film

    • Thickness:125um / 0.125mm / 5 mil
    • Material:Biaxially oriented PET film
    • Surface:Clear, matte, treated, or coating-ready
    • Format:Roll, slit roll, or sheet
    • Processing:Printing, lamination, punching, die cutting
    • Use:Overlay, insulation, spacer, carrier layer
    Read moreDone