No products were found matching your selection.
Other Related Products
-
Protective lens film for spray booths is used as a replaceable transparent layer over a viewing window so paint overspray, dry spray, dust, and routine wiping contact the film before they reach the clear substrate. This guide is intended for glass, coated glass, acrylic, and polycarbonate observation panels used in automotive refinishing and industrial coating areas. The main risks are reduced visibility, trapped contamination, edge lifting, adhesive transfer, film tearing, and an unverified removal interval. Selection should be based on the actual window material, coating condition, optical requirement, booth temperature, cleaning method, vertical holding need, and a sample test that continues through the planned service period.
-
- Material: Clear PET carrier
- Thickness: 50um, 75um, 100um
- Finish: Matte, semi-matte, glossy
- Peel type: Hot peel, cold peel
- Use: Textile logo transfer
- Supply: Rolls or sheets
-
- Material: PE protective film
- Adhesive: Acrylic pressure-sensitive adhesive
- Colors: Blue, clear, white, black/white
- Thickness: 40–100 microns
- Width: 25–1250 mm
- Surfaces: Anodized, powder-coated, painted, and smooth aluminium
-
- Common widths:24 in, 36 in, 48 in, or custom roll width
- Common length:200 ft per roll, custom length available
- Film material:PE / LDPE temporary closure film
- Adhesive:water-based acrylic adhesive, medium tack or high tack
- Color options:blue for visibility, clear for inspection
- Use area:open ductwork, air duct, vent opening, and HVAC fixture protection
-
Polyester film chemical resistance depends on the tested film construction, chemical concentration, contact temperature, exposure time, and applied stress. This technical data supports bare BOPET, surface-treated PET, and adhesive-backed protective film used on glass, metal, plastic, painted, or coated surfaces. Reference values help define a test plan, while the actual chemical, surface, dwell period, and removal behavior should be confirmed through representative sample testing before full use.
-
- Material: PE film
- Adhesive: acrylic-based
- Colors: clear, blue, white, black & white
- Thickness: 30–80 mic typical
- Width: 1000–1500 mm common
- Use: processing to installation
-
- Material: PE film with pressure-sensitive adhesive
- Thickness: 40–80 microns typical
- Width Range: 50–1240 mm
- Length Range: 100–500 m
- Colors: Clear, blue, translucent
- Suitable Surfaces: Float glass, tempered glass, laminated glass, mirror, and selected coated glass
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40 / 50 / 60 / 70 / 80 microns
- Adhesive: Water-based acrylic
- Width: 100–1240 mm
- Surface Match: Gloss, semi-gloss, smooth, lightly textured
-
- Material: PE protective film
- Thickness: 30 / 40 / 50 / 60 / 80 microns
- Colors: Clear, blue, black & white
- Adhesion: Low, medium, or high
- Roll Width: Custom slit widths available
- Surface Finish: 2B, BA, mirror, brushed, No.4, hairline
