No products were found matching your selection.
Other Related Products
-
- Material: PET film
- Finish: clear gloss / matte / anti-glare
- Typical thickness: 100–250 microns
- Surface option: hard coat / anti-fingerprint
- Supply form: rolls, sheets, die-cut pieces
- Adhesive option: removable or application-matched adhesive
-
PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.
-
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Thickness: 30–150 microns
- Colors: clear, blue, white, black-and-white
- Width: up to 2000 mm
- Surface fit: glossy, matte, textured, coated sheets
-
- Thickness: 100um / 0.1mm / approx. 4 mil
- Material: PET polyester film roll
- Color: Clear standard, other finishes on request
- Surface: Untreated, one-side corona, or two-side corona
- Roll format: Custom width, length, 76mm or 152mm core ID, roll OD
- Uses: Die-cutting, insulation parts, labels, adhesive coating, lamination
-
- Material: Clear PET carrier
- Thickness: 50um, 75um, 100um
- Finish: Matte, semi-matte, glossy
- Peel type: Hot peel, cold peel
- Use: Textile logo transfer
- Supply: Rolls or sheets
-
- Material: PE film
- Adhesive: removable self-adhesive coating
- Common Colors: blue, clear, printed
- Common Widths: 24 in, 36 in, 48 in, 600 mm
- Common Roll Lengths: 200 ft, 500 ft, custom
- Typical Use: temporary protection for sealed hard floors
-
- Material: PE film with pressure-sensitive adhesive
- Thickness: 40–80 microns typical
- Width Range: 50–1240 mm
- Length Range: 100–500 m
- Colors: Clear, blue, translucent
- Suitable Surfaces: Float glass, tempered glass, laminated glass, mirror, and selected coated glass
-
PET film chemical resistance describes how an uncoated polyester carrier or a complete coated, adhesive-backed or laminated construction responds to controlled contact with acids, alkalis, solvents, cleaners and process fluids. This technical reference connects film structure, exposure conditions, mechanical and optical checks, peel behaviour and failure observations. Published data can support initial screening, but the supplied grade, actual chemical formulation, protected surface and intended dwell condition should be confirmed by sample testing. Chemical exposure data should not be treated as a penetration limit; evaluate localized loading separately with the PET film puncture resistance technical data.
-
- Material: PE protective film
- Thickness: 30 / 40 / 50 / 60 / 80 microns
- Colors: Clear, blue, black & white
- Adhesion: Low, medium, or high
- Roll Width: Custom slit widths available
- Surface Finish: 2B, BA, mirror, brushed, No.4, hairline
