No products were found matching your selection.
Other Related Products
-
Polyester film chemical resistance depends on the tested film construction, chemical concentration, contact temperature, exposure time, and applied stress. This technical data supports bare BOPET, surface-treated PET, and adhesive-backed protective film used on glass, metal, plastic, painted, or coated surfaces. Reference values help define a test plan, while the actual chemical, surface, dwell period, and removal behavior should be confirmed through representative sample testing before full use.
-
- Common widths:24 in, 36 in, 48 in, or custom roll width
- Common length:200 ft per roll, custom length available
- Film material:PE / LDPE temporary closure film
- Adhesive:water-based acrylic adhesive, medium tack or high tack
- Color options:blue for visibility, clear for inspection
- Use area:open ductwork, air duct, vent opening, and HVAC fixture protection
-
- Crystal-Clear Transparency: Over 90% light transmission with minimal haze
- Advanced Silicone Adhesion: Removable cleanly without sticky residue
- High-Heat Stability: Withstands up to 150 °C (302 °F)
- Anti-Fog Functionality: Prevents hazing and clouding in humid conditions
- Simple Installation & Removal: Bubble-free application, easy to reposition
- Extra Protection Option: UV-blocking or anti-scratch coating available
-
- Material: Clear PET carrier
- Thickness: 50um, 75um, 100um
- Finish: Matte, semi-matte, glossy
- Peel type: Hot peel, cold peel
- Use: Textile logo transfer
- Supply: Rolls or sheets
-
PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.
-
- Material: PE film with pressure-sensitive adhesive
- Adhesion: Low tack, medium tack, or custom
- Color: Clear, blue, or milky translucent
- Thickness: Standard and custom options
- Width: Slit rolls and sheet sizes
- Use: Temporary screen protection
-
- Material: Optical PET or flexible film structure
- Common thickness: 0.10 mm to 0.18 mm
- Color: Clear transparent
- Surface: Glossy, anti-scratch coating optional
- Adhesive: Silicone or pressure-sensitive adhesive
- Supply form: Roll, sheet, or die-cut pieces
-
- Thickness: 250um / 0.25mm for rigid support parts
- Material: PET polyester film with insulating properties
- Color Options: Clear, translucent, milky white, black or custom color
- Surface: Smooth, flat surface with low-curl control
- Processing: Slitting, sheeting, punching, cutting and die-cutting
- Main Uses: Insulation gasket, spacer layer, washer and panel backing
-
- Material: PE film with removable adhesive
- Color: Clear, blue, white, black-white, or printed
- Thickness: 30-100 um, typical factory test range
- Adhesive: Low or medium tack pressure-sensitive adhesive
- Width: Custom slit width, +/-1 mm typical tolerance
- Surface Use: Stainless steel, PCM/VCM, glass, and plastic panels
