No products were found matching your selection.

Other Related Products

  • Heat Transfer Clear PET Release Film

    • Material: Clear PET carrier
    • Thickness: 50um, 75um, 100um
    • Finish: Matte, semi-matte, glossy
    • Peel type: Hot peel, cold peel
    • Use: Textile logo transfer
    • Supply: Rolls or sheets
    Read moreDone

  • Perforated Surface Protection Film

    • Common roll width: 300 mm, 600 mm, 1000 mm, 1220 mm, 1650 mm
    • Film thickness: 40 um-100 um
    • Color options: Clear, blue, white, black-white, or printed marks
    • Material: PE film with controlled hand-tear perforation
    • Tear-off interval: 300 mm, 500 mm, 600 mm, 1000 mm, or custom
    • Main use: Fast temporary covering for floors, counters, doors, windows, and duct openings
    Read moreDone

  • Thermal Protection Plastic Film

    • Material: PE-based removable protective film
    • Color: Clear, blue, white or custom
    • Thickness: 30-120 um typical range
    • Width: 20-2200 mm customizable
    • Adhesive: Acrylic or rubber-based pressure-sensitive adhesive
    • Use: Plastic sheet and formed part protection
    Read moreDone

  • PET Film Puncture Resistance Technical Data

    PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.

    Read moreDone

  • Protective Film For Deep Drawing

    • Material: PE or polyolefin forming-grade film
    • Thickness: 50 um-100 um typical
    • Color: Blue, clear, white, or black-white
    • Adhesive: Removable acrylic or rubber-based adhesive
    • Process: Deep drawing, stamping, forming
    • Use: Metal sheet, appliance, automotive, kitchenware parts
    Read moreDone

  • Polyester Film Chemical Resistance Technical Data

    Polyester film chemical resistance depends on the tested film construction, chemical concentration, contact temperature, exposure time, and applied stress. This technical data supports bare BOPET, surface-treated PET, and adhesive-backed protective film used on glass, metal, plastic, painted, or coated surfaces. Reference values help define a test plan, while the actual chemical, surface, dwell period, and removal behavior should be confirmed through representative sample testing before full use.

    Read moreDone

  • Protective Film Solutions for Pre-Painted Sheet Processing

    Protective film for painted sheet goods should be selected around the full processing route, not from film thickness or initial tack alone. Pre-painted steel, coated aluminum, PCM/VCM panels, roofing sheet, cladding and other finished metal can be exposed to scratches, trapped particles, edge lifting, wrinkles, adhesive transfer and visible surface marking during slitting, punching, bending, roll forming, stamping, storage and shipment. A reliable approval plan starts with the actual coating and finish, then checks application conditions, deformation severity, dwell time and removal stage. Sample testing and a production-representative trial are recommended before full use.

    Read moreDone

  • Surface Guard Protective Film

    • Material: PE protective film
    • Color: Clear, blue, black & white
    • Thickness: 40 / 50 / 60 / 70 / 80 microns
    • Adhesive: Water-based acrylic
    • Width: 100–1240 mm
    • Surface Match: Gloss, semi-gloss, smooth, lightly textured
    Read moreDone

  • Self Adhesive Floor Protection Film

    • Material: PE film
    • Adhesive: removable self-adhesive coating
    • Common Colors: blue, clear, printed
    • Common Widths: 24 in, 36 in, 48 in, 600 mm
    • Common Roll Lengths: 200 ft, 500 ft, custom
    • Typical Use: temporary protection for sealed hard floors
    Read moreDone