No products were found matching your selection.

Other Related Products

  • Heat Transfer Clear PET Release Film

    • Material: Clear PET carrier
    • Thickness: 50um, 75um, 100um
    • Finish: Matte, semi-matte, glossy
    • Peel type: Hot peel, cold peel
    • Use: Textile logo transfer
    • Supply: Rolls or sheets
    Read moreDone

  • Polyester Film Water Absorption – Technical Data & Test Conditions

    Polyester film water absorption is the percentage mass increase of a PET specimen after controlled water exposure. This TDS covers bare, treated, coated, and adhesive-backed PET constructions. Interpret results with thickness, conditioning, water temperature, exposure duration, and construction. Reference data can screen materials, but confirm the actual grade and finished structure by representative testing.

    Read moreDone

  • 100 Micron PET Film

    • Thickness: 100um / 0.1mm / approx. 4 mil
    • Material: PET polyester film roll
    • Color: Clear standard, other finishes on request
    • Surface: Untreated, one-side corona, or two-side corona
    • Roll format: Custom width, length, 76mm or 152mm core ID, roll OD
    • Uses: Die-cutting, insulation parts, labels, adhesive coating, lamination
    Read moreDone

  • Protective Film for Spray Booth Viewing Windows: Installation and Replacement Guide

    Protective lens film for spray booths is used as a replaceable transparent layer over a viewing window so paint overspray, dry spray, dust, and routine wiping contact the film before they reach the clear substrate. This guide is intended for glass, coated glass, acrylic, and polycarbonate observation panels used in automotive refinishing and industrial coating areas. The main risks are reduced visibility, trapped contamination, edge lifting, adhesive transfer, film tearing, and an unverified removal interval. Selection should be based on the actual window material, coating condition, optical requirement, booth temperature, cleaning method, vertical holding need, and a sample test that continues through the planned service period.

    Read moreDone

  • PE Screen Protective Film

    • Material: PE film with pressure-sensitive adhesive
    • Adhesion: Low tack, medium tack, or custom
    • Color: Clear, blue, or milky translucent
    • Thickness: Standard and custom options
    • Width: Slit rolls and sheet sizes
    • Use: Temporary screen protection
    Read moreDone

  • Perforated Surface Protection Film

    • Common roll width: 300 mm, 600 mm, 1000 mm, 1220 mm, 1650 mm
    • Film thickness: 40 um-100 um
    • Color options: Clear, blue, white, black-white, or printed marks
    • Material: PE film with controlled hand-tear perforation
    • Tear-off interval: 300 mm, 500 mm, 600 mm, 1000 mm, or custom
    • Main use: Fast temporary covering for floors, counters, doors, windows, and duct openings
    Read moreDone

  • Protection Tape For Aluminium

    • Material: PE protective film
    • Adhesive: Acrylic pressure-sensitive adhesive
    • Colors: Blue, clear, white, black/white
    • Thickness: 40–100 microns
    • Width: 25–1250 mm
    • Surfaces: Anodized, powder-coated, painted, and smooth aluminium
    Read moreDone

  • Thermal Protection Plastic Film

    • Material: PE-based removable protective film
    • Color: Clear, blue, white or custom
    • Thickness: 30-120 um typical range
    • Width: 20-2200 mm customizable
    • Adhesive: Acrylic or rubber-based pressure-sensitive adhesive
    • Use: Plastic sheet and formed part protection
    Read moreDone

  • Protective Film For Deep Drawing

    • Material: PE or polyolefin forming-grade film
    • Thickness: 50 um-100 um typical
    • Color: Blue, clear, white, or black-white
    • Adhesive: Removable acrylic or rubber-based adhesive
    • Process: Deep drawing, stamping, forming
    • Use: Metal sheet, appliance, automotive, kitchenware parts
    Read moreDone