No products were found matching your selection.
Other Related Products
-
- Common roll width: 300 mm, 600 mm, 1000 mm, 1220 mm, 1650 mm
- Film thickness: 40 um-100 um
- Color options: Clear, blue, white, black-white, or printed marks
- Material: PE film with controlled hand-tear perforation
- Tear-off interval: 300 mm, 500 mm, 600 mm, 1000 mm, or custom
- Main use: Fast temporary covering for floors, counters, doors, windows, and duct openings
-
- Material: PE / LDPE based anti-static film
- Appearance: clear or pink tinted
- Typical thickness: 1 mil to 6 mil
- Supply form: rolls, sheets, liners, tubing, bag stock
- Processing: heat sealable on suitable grades
- Main use: electronics packaging and clean handling
-
Protective film for painted sheet goods should be selected around the full processing route, not from film thickness or initial tack alone. Pre-painted steel, coated aluminum, PCM/VCM panels, roofing sheet, cladding and other finished metal can be exposed to scratches, trapped particles, edge lifting, wrinkles, adhesive transfer and visible surface marking during slitting, punching, bending, roll forming, stamping, storage and shipment. A reliable approval plan starts with the actual coating and finish, then checks application conditions, deformation severity, dwell time and removal stage. Sample testing and a production-representative trial are recommended before full use.
-
- Material: PE protective film
- Adhesive: Acrylic pressure-sensitive adhesive
- Colors: Blue, clear, white, black/white
- Thickness: 40–100 microns
- Width: 25–1250 mm
- Surfaces: Anodized, powder-coated, painted, and smooth aluminium
-
- Material: PE film with pressure-sensitive adhesive
- Adhesion: Low tack, medium tack, or custom
- Color: Clear, blue, or milky translucent
- Thickness: Standard and custom options
- Width: Slit rolls and sheet sizes
- Use: Temporary screen protection
-
Polyester film water absorption is the percentage mass increase of a PET specimen after controlled water exposure. This TDS covers bare, treated, coated, and adhesive-backed PET constructions. Interpret results with thickness, conditioning, water temperature, exposure duration, and construction. Reference data can screen materials, but confirm the actual grade and finished structure by representative testing.
-
- Material: PET polyester film with pressure-sensitive adhesive
- Typical film thickness: 25 / 36 / 50 / 75 / 100 microns
- Adhesive options: acrylic or silicone
- Color options: clear, blue, milky, matte black, or custom
- Supply form: log rolls, slit rolls, sheets, or die-cut pieces
- Common uses: insulation, masking, surface protection, lamination, and converting
-
- Material: Clear PET film with non-silicone release coating
- Release side: Single side release surface
- Color: Transparent or light haze visual grade
- Thickness: 25 um, 36 um, 50 um, 75 um, 100 um
- Supply form: Clear release film roll or sheet supply
- Typical use: Electronics adhesive release liner, clean interleaf, transparent laminate support
-
PET film puncture resistance describes how a defined PET or PET-based construction responds to localized penetration. This technical data compares puncture force, penetration distance, energy, and failure behavior for bare, treated, coated, and adhesive-backed PET films. Results support grade or lot comparison only when the tested structure, probe setup, and conditions are identified. Sample testing remains necessary before full use.
