No products were found matching your selection.
Other Related Products
-
Polyester film chemical resistance depends on the tested film construction, chemical concentration, contact temperature, exposure time, and applied stress. This technical data supports bare BOPET, surface-treated PET, and adhesive-backed protective film used on glass, metal, plastic, painted, or coated surfaces. Reference values help define a test plan, while the actual chemical, surface, dwell period, and removal behavior should be confirmed through representative sample testing before full use.
-
- Material: Clear PET carrier
- Thickness: 50um, 75um, 100um
- Finish: Matte, semi-matte, glossy
- Peel type: Hot peel, cold peel
- Use: Textile logo transfer
- Supply: Rolls or sheets
-
- Material: PE film with pressure-sensitive adhesive
- Thickness: 30 um-120 um, selected by process risk
- Width: 50 mm-1600 mm, custom slitting available
- Roll length: 100 m-1000 m, grade dependent
- Surfaces: coated metal, stainless steel, aluminum
- Use: fabrication, forming, assembly, stacking, internal transport
-
- Common widths: 500 mm-1500 mm rolls
- Color options: blue, white, clear, black
- Base material: flame-retardant PE film
- Surface type: smooth or anti-slip embossed
- Thickness range: 80-1000 um
- Main use: temporary site surface covering
-
- Material: PE or polyolefin forming-grade film
- Thickness: 50 um-100 um typical
- Color: Blue, clear, white, or black-white
- Adhesive: Removable acrylic or rubber-based adhesive
- Process: Deep drawing, stamping, forming
- Use: Metal sheet, appliance, automotive, kitchenware parts
-
Polyester film water absorption is the percentage mass increase of a PET specimen after controlled water exposure. This TDS covers bare, treated, coated, and adhesive-backed PET constructions. Interpret results with thickness, conditioning, water temperature, exposure duration, and construction. Reference data can screen materials, but confirm the actual grade and finished structure by representative testing.
-
Protective film for painted sheet goods should be selected around the full processing route, not from film thickness or initial tack alone. Pre-painted steel, coated aluminum, PCM/VCM panels, roofing sheet, cladding and other finished metal can be exposed to scratches, trapped particles, edge lifting, wrinkles, adhesive transfer and visible surface marking during slitting, punching, bending, roll forming, stamping, storage and shipment. A reliable approval plan starts with the actual coating and finish, then checks application conditions, deformation severity, dwell time and removal stage. Sample testing and a production-representative trial are recommended before full use.
-
- Material: APET / RPET
- Color: clear, translucent, tinted
- Surface: glossy, smooth
- Supply form: roll stock
- Thickness: custom production range
- Typical use: thermoforming and packaging conversion
-
- Material: Optical PET or flexible film structure
- Common thickness: 0.10 mm to 0.18 mm
- Color: Clear transparent
- Surface: Glossy, anti-scratch coating optional
- Adhesive: Silicone or pressure-sensitive adhesive
- Supply form: Roll, sheet, or die-cut pieces
