No products were found matching your selection.
Other Related Products
-
- Material: PE or polyolefin forming-grade film
- Thickness: 50 um-100 um typical
- Color: Blue, clear, white, or black-white
- Adhesive: Removable acrylic or rubber-based adhesive
- Process: Deep drawing, stamping, forming
- Use: Metal sheet, appliance, automotive, kitchenware parts
-
- Material: PE film
- Adhesive: removable self-adhesive coating
- Common Colors: blue, clear, printed
- Common Widths: 24 in, 36 in, 48 in, 600 mm
- Common Roll Lengths: 200 ft, 500 ft, custom
- Typical Use: temporary protection for sealed hard floors
-
PET film chemical resistance describes how an uncoated polyester carrier or a complete coated, adhesive-backed or laminated construction responds to controlled contact with acids, alkalis, solvents, cleaners and process fluids. This technical reference connects film structure, exposure conditions, mechanical and optical checks, peel behaviour and failure observations. Published data can support initial screening, but the supplied grade, actual chemical formulation, protected surface and intended dwell condition should be confirmed by sample testing.
-
- Material:Red transparent PET film or red transparent PVC film
- Color Density:Light red, standard red, deep red, or sample-matched tone
- Thickness:PET 25 um – 250 um / PVC 100 um – 500 um typical
- Light Transmission:Light red 55% – 78% / deep red 18% – 45% typical
- Surface:Smooth roll surface for printing, lamination, slitting, or die-cutting
- Uses:Packaging window, lighting filter, display overlay, LED window, visual identification
-
- Material: PE protective film
- Thickness: 30 / 40 / 50 / 60 / 80 microns
- Colors: Clear, blue, black & white
- Adhesion: Low, medium, or high
- Roll Width: Custom slit widths available
- Surface Finish: 2B, BA, mirror, brushed, No.4, hairline
-
- Common widths:24 in, 36 in, 48 in, or custom roll width
- Common length:200 ft per roll, custom length available
- Film material:PE / LDPE temporary closure film
- Adhesive:water-based acrylic adhesive, medium tack or high tack
- Color options:blue for visibility, clear for inspection
- Use area:open ductwork, air duct, vent opening, and HVAC fixture protection
-
Protective lens film for spray booths is used as a replaceable transparent layer over a viewing window so paint overspray, dry spray, dust, and routine wiping contact the film before they reach the clear substrate. This guide is intended for glass, coated glass, acrylic, and polycarbonate observation panels used in automotive refinishing and industrial coating areas. The main risks are reduced visibility, trapped contamination, edge lifting, adhesive transfer, film tearing, and an unverified removal interval. Selection should be based on the actual window material, coating condition, optical requirement, booth temperature, cleaning method, vertical holding need, and a sample test that continues through the planned service period.
-
- Material: PE film with pressure-sensitive adhesive
- Thickness: 30 um-120 um, selected by process risk
- Width: 50 mm-1600 mm, custom slitting available
- Roll length: 100 m-1000 m, grade dependent
- Surfaces: coated metal, stainless steel, aluminum
- Use: fabrication, forming, assembly, stacking, internal transport
-
- Material: PE film with removable adhesive
- Color: Clear, blue, white, black-white, or printed
- Thickness: 30-100 um, typical factory test range
- Adhesive: Low or medium tack pressure-sensitive adhesive
- Width: Custom slit width, +/-1 mm typical tolerance
- Surface Use: Stainless steel, PCM/VCM, glass, and plastic panels
