No products were found matching your selection.

Other Related Products

  • Surface Guard Protective Film

    • Material: PE protective film
    • Color: Clear, blue, black & white
    • Thickness: 40 / 50 / 60 / 70 / 80 microns
    • Adhesive: Water-based acrylic
    • Width: 100–1240 mm
    • Surface Match: Gloss, semi-gloss, smooth, lightly textured
    Read moreDone

  • Carpet Protection During Construction: Temporary Film Application & Clean Removal

    Carpet protection during construction should be managed as a jobsite process, not a simple covering task. It applies when installed carpet remains during fit-out, painting, punch-list work, furniture installation, or repeated trade traffic. Key risks are embedded grit, spills, edge lifting, wrinkles, puncture, adhesion growth, adhesive transfer, and fiber disturbance. Selection should reflect carpet construction, cleanliness, traffic, planned dwell, environment, application method, and an actual-carpet trial.

    Read moreDone

  • Stainless Steel Sheet Protective Film

    • Material: PE protective film
    • Thickness: 30 / 40 / 50 / 60 / 80 microns
    • Colors: Clear, blue, black & white
    • Adhesion: Low, medium, or high
    • Roll Width: Custom slit widths available
    • Surface Finish: 2B, BA, mirror, brushed, No.4, hairline
    Read moreDone

  • UV Protection PET Film

    • Material: clear PET film
    • Structure: PET with PSA
    • Color: clear or light anti-glare
    • Thickness: 25-125 um PET base
    • Supply: rolls or slit rolls
    • Use: printed and display surfaces
    Read moreDone

  • Fire Retardant Protection Film

    • Common widths: 500 mm-1500 mm rolls
    • Color options: blue, white, clear, black
    • Base material: flame-retardant PE film
    • Surface type: smooth or anti-slip embossed
    • Thickness range: 80-1000 um
    • Main use: temporary site surface covering
    Read moreDone
  • Placeholder

    Non Silicone Release Film

    • Material: Clear PET film with non-silicone release coating
    • Release side: Single side release surface
    • Color: Transparent or light haze visual grade
    • Thickness: 25 um, 36 um, 50 um, 75 um, 100 um
    • Supply form: Clear release film roll or sheet supply
    • Typical use: Electronics adhesive release liner, clean interleaf, transparent laminate support
    Read moreDone

  • 125 Micron Polyester Film

    • Thickness:125um / 0.125mm / 5 mil
    • Material:Biaxially oriented PET film
    • Surface:Clear, matte, treated, or coating-ready
    • Format:Roll, slit roll, or sheet
    • Processing:Printing, lamination, punching, die cutting
    • Use:Overlay, insulation, spacer, carrier layer
    Read moreDone

  • 250 Micron PET Film

    • Thickness: 250um / 0.25mm for rigid support parts
    • Material: PET polyester film with insulating properties
    • Color Options: Clear, translucent, milky white, black or custom color
    • Surface: Smooth, flat surface with low-curl control
    • Processing: Slitting, sheeting, punching, cutting and die-cutting
    • Main Uses: Insulation gasket, spacer layer, washer and panel backing
    Read moreDone

  • Laser Cutting Stainless Steel With Protective Film: Adhesion and Cut Quality Solution

    Laser cutting stainless steel with film is most reliable when the protective layer, stainless steel finish, lamination method, laser process, part geometry, and removal timing are validated as one system. This guide addresses bubbling at pierce points, lifting along cut paths, film shrinkage, surface contamination, scratches, adhesive transfer, and difficult removal on 2B, BA, mirror, brushed, hairline, and coated stainless steel. It is intended for sheet-metal processing where the film remains on the plate during cutting and may continue through bending, stacking, storage, or transport. The main acceptance test is a production-representative trial on the actual surface, machine, and removal schedule.

    Read moreDone