No products were found matching your selection.
Other Related Products
-
Laser cutting stainless steel with film is most reliable when the protective layer, stainless steel finish, lamination method, laser process, part geometry, and removal timing are validated as one system. This guide addresses bubbling at pierce points, lifting along cut paths, film shrinkage, surface contamination, scratches, adhesive transfer, and difficult removal on 2B, BA, mirror, brushed, hairline, and coated stainless steel. It is intended for sheet-metal processing where the film remains on the plate during cutting and may continue through bending, stacking, storage, or transport. The main acceptance test is a production-representative trial on the actual surface, machine, and removal schedule.
-
- Material: Chemical coated BOPET / PET film
- Color: Clear transparent
- Coating side: One-side, two-side, or coated plus corona treated
- Thickness: 12-250 um
- Supply form: Jumbo roll, slit roll, or sheet
- Uses: Printing, coating, lamination, metallizing, label stock
-
Polyester film water absorption is the percentage mass increase of a PET specimen after controlled water exposure. This TDS covers bare, treated, coated, and adhesive-backed PET constructions. Interpret results with thickness, conditioning, water temperature, exposure duration, and construction. Reference data can screen materials, but confirm the actual grade and finished structure by representative testing.
-
- Material: PE protective film
- Thickness: 30 / 40 / 50 / 60 / 80 microns
- Colors: Clear, blue, black & white
- Adhesion: Low, medium, or high
- Roll Width: Custom slit widths available
- Surface Finish: 2B, BA, mirror, brushed, No.4, hairline
-
- Material: PE or PET-based
- Color: Clear, blue, or milky white
- Adhesion: Low to medium tack
- Thickness: 30–100 microns
- Supply Form: Roll, sheet, slit roll, or die-cut
- Use Stage: Printing to final assembly
-
- Material: PET film with double side silicone coating
- Typical Thickness: 25 um, 36 um, 50 um, 75 um, 100 um
- Color Options: Clear, milky white, blue, red, or matte finish
- Release Design: Equal release or differential release liner
- Common Width: 300-1600 mm, slit roll available
- Main Use: Tape, label stock, foam tape, and die-cut liner
-
- Material: Clear PET polyester film
- Surface: Printable receiving coating
- Finish: Clear, semi-matte, or matte
- Thickness: 50um, 75um, 100um typical
- Roll Core: 3 inch or 6 inch core
- Use: Sublimation printing and transfer testing
-
Protective lens film for spray booths is used as a replaceable transparent layer over a viewing window so paint overspray, dry spray, dust, and routine wiping contact the film before they reach the clear substrate. This guide is intended for glass, coated glass, acrylic, and polycarbonate observation panels used in automotive refinishing and industrial coating areas. The main risks are reduced visibility, trapped contamination, edge lifting, adhesive transfer, film tearing, and an unverified removal interval. Selection should be based on the actual window material, coating condition, optical requirement, booth temperature, cleaning method, vertical holding need, and a sample test that continues through the planned service period.
-
- Material: printed self adhesive PVC film with release liner.
- Width: 600 mm, 900 mm, 1220 mm, or custom slit width.
- Length: 10 m, 25 m, 50 m, or project roll format.
- Finish: glossy, satin matte, or soft stone texture.
- Pattern: white grey, black gold, beige stone, or custom veining.
- Surface: dry, flat, sealed and non-porous counter surfaces.
