No products were found matching your selection.
Other Related Products
-
Laser cutting stainless steel with film is most reliable when the protective layer, stainless steel finish, lamination method, laser process, part geometry, and removal timing are validated as one system. This guide addresses bubbling at pierce points, lifting along cut paths, film shrinkage, surface contamination, scratches, adhesive transfer, and difficult removal on 2B, BA, mirror, brushed, hairline, and coated stainless steel. It is intended for sheet-metal processing where the film remains on the plate during cutting and may continue through bending, stacking, storage, or transport. The main acceptance test is a production-representative trial on the actual surface, machine, and removal schedule.
-
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Thickness: 30–150 microns
- Colors: clear, blue, white, black-and-white
- Width: up to 2000 mm
- Surface fit: glossy, matte, textured, coated sheets
-
- Material: Chemical coated BOPET / PET film
- Color: Clear transparent
- Coating side: One-side, two-side, or coated plus corona treated
- Thickness: 12-250 um
- Supply form: Jumbo roll, slit roll, or sheet
- Uses: Printing, coating, lamination, metallizing, label stock
-
- Material: PE film
- Adhesive: acrylic-based
- Colors: clear, blue, white, black & white
- Thickness: 30–80 mic typical
- Width: 1000–1500 mm common
- Use: processing to installation
-
PET film chemical resistance describes how an uncoated polyester carrier or a complete coated, adhesive-backed or laminated construction responds to controlled contact with acids, alkalis, solvents, cleaners and process fluids. This technical reference connects film structure, exposure conditions, mechanical and optical checks, peel behaviour and failure observations. Published data can support initial screening, but the supplied grade, actual chemical formulation, protected surface and intended dwell condition should be confirmed by sample testing. Chemical exposure data should not be treated as a penetration limit; evaluate localized loading separately with the PET film puncture resistance technical data.
-
- Material: PE-based removable protective film
- Color: Clear, blue, white or custom
- Thickness: 30-120 um typical range
- Width: 20-2200 mm customizable
- Adhesive: Acrylic or rubber-based pressure-sensitive adhesive
- Use: Plastic sheet and formed part protection
-
Polyester film water absorption is the percentage mass increase of a PET specimen after controlled water exposure. This TDS covers bare, treated, coated, and adhesive-backed PET constructions. Interpret results with thickness, conditioning, water temperature, exposure duration, and construction. Reference data can screen materials, but confirm the actual grade and finished structure by representative testing.
-
- Material: PE / LDPE based anti-static film
- Appearance: clear or pink tinted
- Typical thickness: 1 mil to 6 mil
- Supply form: rolls, sheets, liners, tubing, bag stock
- Processing: heat sealable on suitable grades
- Main use: electronics packaging and clean handling
-
- Material: APET / RPET
- Color: clear, translucent, tinted
- Surface: glossy, smooth
- Supply form: roll stock
- Thickness: custom production range
- Typical use: thermoforming and packaging conversion
