No products were found matching your selection.
Other Related Products
-
- Material: PE film with removable adhesive
- Color: Black/white, transparent, blue, or printed
- Thickness: Typical 60-100 um
- Adhesion: 1.8-5.5 N/25 mm typical range
- Roll format: Slit rolls for sheet lamination
- Suitable surface: Stainless steel, coated metal, aluminum sheet
-
- Material:Red transparent PET film or red transparent PVC film
- Color Density:Light red, standard red, deep red, or sample-matched tone
- Thickness:PET 25 um – 250 um / PVC 100 um – 500 um typical
- Light Transmission:Light red 55% – 78% / deep red 18% – 45% typical
- Surface:Smooth roll surface for printing, lamination, slitting, or die-cutting
- Uses:Packaging window, lighting filter, display overlay, LED window, visual identification
-
- Material: Clear PET polyester film
- Surface: Printable receiving coating
- Finish: Clear, semi-matte, or matte
- Thickness: 50um, 75um, 100um typical
- Roll Core: 3 inch or 6 inch core
- Use: Sublimation printing and transfer testing
-
- Thickness: 100um / 0.1mm / approx. 4 mil
- Material: PET polyester film roll
- Color: Clear standard, other finishes on request
- Surface: Untreated, one-side corona, or two-side corona
- Roll format: Custom width, length, 76mm or 152mm core ID, roll OD
- Uses: Die-cutting, insulation parts, labels, adhesive coating, lamination
-
- Material: PVC decorative vinyl with adhesive backing
- Finish: wood grain, matte, gloss, high gloss, solid color
- Width: 600mm, 1220mm, 1240mm, or custom
- Roll length: 30m, 50m, 100m, or bulk roll
- Surfaces: sealed MDF, laminated board, plywood, painted furniture panels
- Supply: roll, cut sheet, sample swatch, color-matched batch
-
- Common widths: 500 mm-1500 mm rolls
- Color options: blue, white, clear, black
- Base material: flame-retardant PE film
- Surface type: smooth or anti-slip embossed
- Thickness range: 80-1000 um
- Main use: temporary site surface covering
-
Laser cutting stainless steel with film is most reliable when the protective layer, stainless steel finish, lamination method, laser process, part geometry, and removal timing are validated as one system. This guide addresses bubbling at pierce points, lifting along cut paths, film shrinkage, surface contamination, scratches, adhesive transfer, and difficult removal on 2B, BA, mirror, brushed, hairline, and coated stainless steel. It is intended for sheet-metal processing where the film remains on the plate during cutting and may continue through bending, stacking, storage, or transport. The main acceptance test is a production-representative trial on the actual surface, machine, and removal schedule.
-
- Material: PET polyester film with pressure-sensitive adhesive
- Typical film thickness: 25 / 36 / 50 / 75 / 100 microns
- Adhesive options: acrylic or silicone
- Color options: clear, blue, milky, matte black, or custom
- Supply form: log rolls, slit rolls, sheets, or die-cut pieces
- Common uses: insulation, masking, surface protection, lamination, and converting
-
- Common widths:24 in, 36 in, 48 in, or custom roll width
- Common length:200 ft per roll, custom length available
- Film material:PE / LDPE temporary closure film
- Adhesive:water-based acrylic adhesive, medium tack or high tack
- Color options:blue for visibility, clear for inspection
- Use area:open ductwork, air duct, vent opening, and HVAC fixture protection
