No products were found matching your selection.
Other Related Products
-
- Thickness: 250um / 0.25mm for rigid support parts
- Material: PET polyester film with insulating properties
- Color Options: Clear, translucent, milky white, black or custom color
- Surface: Smooth, flat surface with low-curl control
- Processing: Slitting, sheeting, punching, cutting and die-cutting
- Main Uses: Insulation gasket, spacer layer, washer and panel backing
-
Laser cutting stainless steel with film is most reliable when the protective layer, stainless steel finish, lamination method, laser process, part geometry, and removal timing are validated as one system. This guide addresses bubbling at pierce points, lifting along cut paths, film shrinkage, surface contamination, scratches, adhesive transfer, and difficult removal on 2B, BA, mirror, brushed, hairline, and coated stainless steel. It is intended for sheet-metal processing where the film remains on the plate during cutting and may continue through bending, stacking, storage, or transport. The main acceptance test is a production-representative trial on the actual surface, machine, and removal schedule.
-
- Material: PE protective film
- Thickness: 30 / 40 / 50 / 60 / 80 microns
- Colors: Clear, blue, black & white
- Adhesion: Low, medium, or high
- Roll Width: Custom slit widths available
- Surface Finish: 2B, BA, mirror, brushed, No.4, hairline
-
- Material: PET polyester film with pressure-sensitive adhesive
- Typical film thickness: 25 / 36 / 50 / 75 / 100 microns
- Adhesive options: acrylic or silicone
- Color options: clear, blue, milky, matte black, or custom
- Supply form: log rolls, slit rolls, sheets, or die-cut pieces
- Common uses: insulation, masking, surface protection, lamination, and converting
-
- Material: APET / RPET
- Color: clear, translucent, tinted
- Surface: glossy, smooth
- Supply form: roll stock
- Thickness: custom production range
- Typical use: thermoforming and packaging conversion
-
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Thickness: 30–150 microns
- Colors: clear, blue, white, black-and-white
- Width: up to 2000 mm
- Surface fit: glossy, matte, textured, coated sheets
-
- Material: PE film with pressure-sensitive adhesive
- Adhesion: Low tack, medium tack, or custom
- Color: Clear, blue, or milky translucent
- Thickness: Standard and custom options
- Width: Slit rolls and sheet sizes
- Use: Temporary screen protection
-
Polyester film water absorption is the percentage mass increase of a PET specimen after controlled water exposure. This TDS covers bare, treated, coated, and adhesive-backed PET constructions. Interpret results with thickness, conditioning, water temperature, exposure duration, and construction. Reference data can screen materials, but confirm the actual grade and finished structure by representative testing.
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40 / 50 / 60 / 70 / 80 microns
- Adhesive: Water-based acrylic
- Width: 100–1240 mm
- Surface Match: Gloss, semi-gloss, smooth, lightly textured
