No products were found matching your selection.

Other Related Products

  • Glass Surface Protection Film

    • Material: PE film with pressure-sensitive adhesive
    • Thickness: 40–80 microns typical
    • Width Range: 50–1240 mm
    • Length Range: 100–500 m
    • Colors: Clear, blue, translucent
    • Suitable Surfaces: Float glass, tempered glass, laminated glass, mirror, and selected coated glass
    Read moreDone
  • Placeholder

    Non Silicone Release Film

    • Material: Clear PET film with non-silicone release coating
    • Release side: Single side release surface
    • Color: Transparent or light haze visual grade
    • Thickness: 25 um, 36 um, 50 um, 75 um, 100 um
    • Supply form: Clear release film roll or sheet supply
    • Typical use: Electronics adhesive release liner, clean interleaf, transparent laminate support
    Read moreDone

  • 125 Micron Polyester Film

    • Thickness:125um / 0.125mm / 5 mil
    • Material:Biaxially oriented PET film
    • Surface:Clear, matte, treated, or coating-ready
    • Format:Roll, slit roll, or sheet
    • Processing:Printing, lamination, punching, die cutting
    • Use:Overlay, insulation, spacer, carrier layer
    Read moreDone

  • PE Screen Protective Film

    • Material: PE film with pressure-sensitive adhesive
    • Adhesion: Low tack, medium tack, or custom
    • Color: Clear, blue, or milky translucent
    • Thickness: Standard and custom options
    • Width: Slit rolls and sheet sizes
    • Use: Temporary screen protection
    Read moreDone

  • Protective Film Solutions for Pre-Painted Sheet Processing

    Protective film for painted sheet goods should be selected around the full processing route, not from film thickness or initial tack alone. Pre-painted steel, coated aluminum, PCM/VCM panels, roofing sheet, cladding and other finished metal can be exposed to scratches, trapped particles, edge lifting, wrinkles, adhesive transfer and visible surface marking during slitting, punching, bending, roll forming, stamping, storage and shipment. A reliable approval plan starts with the actual coating and finish, then checks application conditions, deformation severity, dwell time and removal stage. Sample testing and a production-representative trial are recommended before full use.

    Read moreDone

  • 100 Micron PET Film

    • Thickness: 100um / 0.1mm / approx. 4 mil
    • Material: PET polyester film roll
    • Color: Clear standard, other finishes on request
    • Surface: Untreated, one-side corona, or two-side corona
    • Roll format: Custom width, length, 76mm or 152mm core ID, roll OD
    • Uses: Die-cutting, insulation parts, labels, adhesive coating, lamination
    Read moreDone

  • Heat Transfer Clear PET Release Film

    • Material: Clear PET carrier
    • Thickness: 50um, 75um, 100um
    • Finish: Matte, semi-matte, glossy
    • Peel type: Hot peel, cold peel
    • Use: Textile logo transfer
    • Supply: Rolls or sheets
    Read moreDone

  • Touch Screen Protection Film

    • Material: PET film
    • Finish: clear gloss / matte / anti-glare
    • Typical thickness: 100–250 microns
    • Surface option: hard coat / anti-fingerprint
    • Supply form: rolls, sheets, die-cut pieces
    • Adhesive option: removable or application-matched adhesive
    Read moreDone

  • Thermal Protection Plastic Film

    • Material: PE-based removable protective film
    • Color: Clear, blue, white or custom
    • Thickness: 30-120 um typical range
    • Width: 20-2200 mm customizable
    • Adhesive: Acrylic or rubber-based pressure-sensitive adhesive
    • Use: Plastic sheet and formed part protection
    Read moreDone