Films Protection Company is a manufacturer of Heat Resistant Transparent Protective Film for factories that need visible surface protection during heat-related processing. Suitable grades should match temperature, dwell time, pressure, substrate surface, equipment type, removal stage, and whether the film works as a release layer, protection layer, or forming-preparation layer.
Showing all 6 results
Heat Resistant Transparent Protective Film is selected when a surface must stay visible during heating, pressing, transfer, or forming. The film should stay flat, reduce sticking, and remove after heating and cooling without residue, haze change, platen contamination, or unwanted marks. Production teams should confirm roll or sheet format, temporary adhesion, release treatment, reusable sheet use, or disposable interleaving.
This category includes process films for heat transfer, sublimation protection sheets, thermal pressing cover films, temporary heat protection films, thermoforming preparation films, and non-stick release sheets. Selection should match platen contact, transfer paper movement, forming depth, cooling stage, peel timing, and contact with ink, coating, adhesive, fabric, or the heated plate.
Structures can be adhesive-free, adhesive-coated, linerless, release liner-backed, low-friction, release-treated, or temporarily tacky. A platen cover often works without adhesive, while a forming-preparation film may need controlled hold during heating and bending.
Product Series | Main Function | Typical Procurement Use |
Heat transfer decoration film | Positioning, isolation, release | Graphics, labels, logos, decorative transfer layers |
Sublimation protection sheet or film | Reduces ghosting, dye migration, ink bleed | Textile sublimation, coated blanks, photo panels |
Thermal pressing cover film | Protects platen and pressed surface | Heat press, hot bonding, hot lamination |
Temporary heat protection film | Protects surfaces during short heat exposure | Heated assembly, finishing, process masking |
Thermoforming preparation film | Protects sheets during heating and forming | Acrylic, PC, ABS, PS, PETG sheets |
Non-stick release film or sheet | Low-friction separation | Reusable covers, interleaving, anti-stick layers |
Product selection should begin with the production route. A sublimation line should check dye migration, paper movement, ink bleed risk, platen cleanliness, and printed-surface contact. A thermal pressing cover film should match platen size, dwell time, pressure, surface contact, and hot peel or cold peel behavior. A forming-preparation film must follow the sheet without tearing, wrinkling, curling, edge lift, gloss change, or mold marks.
Selection Factor | Better Choice Direction | Risk If Misselected |
Heat transfer decoration | Stable release, clear inspection | Poor peel, image distortion |
Sublimation workflow | Ghosting, dye migration, paper movement checks | Shadow marks, ink bleed |
Thermal pressing | Platen size, dwell time, pressure, non-stick surface | Contamination, scorching |
Thermoforming preparation | Forming depth, bend radius, shrinkage review | Tearing, wrinkles, mold marks |
Temporary heat protection | Short heat exposure, clean removal after cooling | Residue, curling, haze |
Roll or sheet processing | COF, slit edge, flatness, sheet size | Blocking, feeding instability |
Before protective film is used for thermoforming preparation, confirm whether it can handle both heat and movement. During shallow thermoforming, line bending, vacuum forming, or heated plastic sheet preparation, the film may need to follow a softened sheet without tearing, shrinking, wrinkling, curling, or transferring marks to the mold. Test it with planned heating time, forming depth, sheet material, surface gloss, cooling stage, and removal timing.
Item | Typical Range / Customizable Value |
Category type | Transparent protective film for heat transfer, sublimation, thermal pressing, temporary heat protection, and thermoforming preparation |
Film / supply structure | Clear, translucent, co-extruded, release-treated, non-stick, adhesive-free, adhesive-coated, linerless, or liner-backed film |
Thickness range | 25 um - 250 um, selected by pressure, reuse demand, movement, and protection level |
Width / sheet range | 50 mm - 1600 mm slit rolls, custom sheets, pads, and interleaving sheets |
Heat condition | Grade-dependent short-time exposure from 80 C - 220 C, confirmed by dwell time and pressure |
Dwell time | 5 seconds - 30 minutes, depending on pressing, sublimation, transfer, or forming preparation |
Release option | No adhesive, low tack, medium tack, hot peel, cold peel, or release surface |
Verification | 90 degree or 180 degree peel reference, haze, transmittance, COF, residue, curling, flatness |
Contamination check | Ghosting, dye migration, ink transfer, adhesive pickup, platen contamination, mold-side marks |
Converting / quality | Slitting, rewinding, sheeting, perforating, die cutting, retained sample, lot traceability, batch consistency |
Customization should start from the real process. Confirm press temperature, transfer paper, ink system, fabric or panel type, peeling method, ghosting risk, dye migration risk, platen size, pressure, dwell time, reuse frequency, and reusable or disposable sheet format. Films Protection Company can support custom thickness, roll width, roll length, sheet dimension, finish, release level, tack level, winding direction, core size, and converted format. MOQ can be discussed by slit width, sheet size, roll length, converting method, packaging, and whether trial rolls or sample sheets are needed before repeat production.
It may act as a non-stick barrier between the printed surface, garment, transfer layer, and heated platen. Before bulk purchasing, test it with actual ink, transfer paper, fabric, platen condition, storage condition, and peeling method. For repeat orders, the approved sample should record whether the sheet was used as a direct contact layer, platen cover, or separation layer.
Roll format suits continuous processing, custom slitting, roll-to-roll transfer, and repeated production. Sheet format is better for heat press stations, platen protection, sublimation blanks, interleaving, or small-batch pressing. Match equipment width, platen size, operating speed, and handling method.
Confirm actual temperature, dwell time, pressure, cooling stage, and peel timing. Test short-time heat exposure with the substrate. Review residue, curling, edge lift, shrinkage, haze, platen marks, and hot peel or cold peel behavior after heating and cooling.
Not always. Transfer and sublimation may require release or non-stick performance, while forming preparation needs movement tolerance, forming stability, and clean removal from shaped surfaces. Shared use should be approved only after actual process trials.
Check sample rolls or sheets under the real process. Useful references include haze, transmittance, peel or release behavior, COF, residue inspection, platen contamination review, ghosting and dye migration check, storage blocking risk, and batch consistency. A current datasheet, process temperature, dwell time, pressure setting, and retained sample help keep repeat orders aligned with the approved grade.
