Films Protection Company is a die cut surface protection film manufacturer for custom converted use. This category is for customers who need protection film supplied as working formats. We convert film into die cut parts, slit rolls, perforated rolls, pre-cut lengths, custom roll widths, and surface protection film tape, helping distributors, contractors, and manufacturing plants apply, repack, tear, position, and remove film efficiently.
Showing the single result
A standard wide roll is not always the most practical supply form. It may reduce roll cost, but extra labor appears when each piece must be measured, cut, sorted, or repacked by hand. This category focuses on film that arrives closer to real use.
A low tack surface protection film suits short-term attachment and easier removal on smooth or sensitive surfaces. Medium tack grades are better for handling, storage, or transportation. Before bulk conversion, adhesion can be checked by 180-degree peel testing on stainless steel or customer-supplied panels.
The covered range includes die cut parts, slit rolls, perforated rolls, pre-cut sheets, and narrow tape-style rolls. For die cut protective film, shapes can be made from drawings, samples, or use instructions. Details may include pull tabs, split liner, extended liner, locator holes, rounded corners, kiss-cut pieces on liner, and multi-cavity layouts. Roll products can be regular wound, reverse wound, short reseller rolls, or production rolls.
Choose die cut film for fixed outlines or fast liner removal. Choose slit rolls when width control matters most. Choose perforated rolls for fixed tear lengths without knives. Choose pre-cut sheets when each carton, kit, workstation, or resale pack needs the same size and quantity.
A complete surface protection film specification should include thickness, width, length, tack level, target surface, attachment time, perforation interval, pre-cut length, core size, winding direction, printing, and carton format. For shaped parts, add tolerance, liner size, tab position, hole position, and waste stripping requirement.
Before confirming converted protection film, the purchasing team should explain how the material will be used. Key details include width, length, tack level, perforation interval, pre-cut length, core size, winding direction, printing, and carton quantity. For die cut surface protection film, drawings should show outline, liner size, pull-tab position, hole location, tolerance, and whether kiss-cut pieces stay on the liner. Clear specifications help prevent difficult tearing, poor liner release, wrong roll direction, oversized cartons, or unnecessary trimming.
Item | Typical Range / Customizable Value |
Film material | PE, LDPE, co-extruded PE, PET option |
Film thickness | 30 um - 150 um |
Adhesive and test | Water-based acrylic, low tack or medium tack, 180-degree peel test |
Test condition | Stainless steel or customer-supplied panel, 23 C and 50% RH |
Roll size | 20 mm - 1600 mm width, 50 m - 1000 m length |
Tape roll format | 20 mm - 300 mm width, adhesive in or adhesive out |
Perforation and pre-cut | 100 mm - 1000 mm perforation, 100 mm - 2000 mm pre-cut length |
Die-cut structure | +/-0.5 mm to +/-1.5 mm tolerance, split liner, extended liner, pull tab |
Core, winding, packing | 1 inch, 2 inch, 3 inch core, regular or reverse wound, carton pack |
Films Protection Company can convert film according to drawings, sample rolls, carton targets, or use instructions. Options include die shape, slit width, roll length, perforation spacing, pre-cut sheet size, pull-tab design, liner extension, split liner, color, printed warning text, roll core, winding direction, and carton quantity.
Surface protection film manufacturing process checks support quality control while the main focus remains on converted formats, clean removal, cutting accuracy, and stable bulk supply. Before mass conversion, we review slit edge cleanliness, perforation tear behavior, die-cut waste stripping, liner release, and removal after the planned attachment period.
Converted film improves efficiency because the material arrives closer to its final working form. A distributor may need narrow rolls and fixed carton quantity. A contractor may prefer perforated rolls with fixed tear intervals to avoid knives on site. A manufacturing plant may need die-cut parts, custom widths, or pre-cut lengths that operators can apply without measuring each piece. Early format confirmation helps reduce waste and improve consistency.
Yes. It can be supplied as kiss-cut parts on liner, sheets, stacked die cut pieces, narrow slit rolls, or perforated rolls.
Useful information includes drawing file, sample part, target surface, size, tolerance, adhesive tack, liner type, pull-tab position, carton quantity, and stacking method.
Yes. It is selected for short-term attachment and easier removal on smooth or sensitive surfaces. Testing is recommended before bulk use.
Perforated rolls stay in roll form with fixed tear intervals. Pre-cut sheets are separated into fixed sizes for kits, workstations, or distributor packs.
