Films Protection Company is a wholesale sheet metal protective film manufacturer for PE films used in metal surface processing. This category covers stainless steel, aluminum sheet, aluminum profile, pre-coated metal, appliance panels, deep drawing parts, and selected laser-cut sheets. Film grades are matched by surface gloss, coating type, forming stress, 180-degree peel force, removal time, and residue control during slitting, bending, stamping, storage, shipment, and installation.
Showing all 8 results
Metal sheets are often protected long before the final product is finished. During uncoiling, slitting, cutting, punching, bending, stamping, deep drawing, stacking, and export shipment, visible surfaces can be scratched by rollers, marked by tools, contaminated by cutting dust, or pressed by panel-to-panel friction.
A wholesale sheet metal protective film has to stay in place through these steps, then peel away cleanly when the panel is ready. High-gloss stainless steel can show adhesive shadow or ghosting after aging tests. Brushed and hairline surfaces need stronger edge holding during folding or roll forming. Aluminum sheets and profiles are softer, so removal stress must be controlled. Pre-coated metal and appliance panels need careful residue checks because coating stain or film lifting can turn into costly rework.
Films Protection Company supplies protective film groups for several metal-processing needs. For stainless steel, we cover 2B, BA, mirror, brushed, hairline, and No.4 finishes, with china stainless steel protective film supply available for export-oriented sheet processors that need clean removal after storage and shipment.
For aluminum, the range includes flat aluminum sheet, aluminum coil, aluminum profile, anodized aluminum, brushed aluminum, and mirror aluminum. We also supply films for painted steel, color-coated sheets, PCM/VCM appliance panels, coated aluminum panels, and metal housings. For higher forming stress, deep drawing and stamping grades can be selected with better elongation, surface conformity, and adhesive stability. For selected laser cutting work, film grades can be matched for edge cleanliness, cutting residue control, temporary surface protection, and post-process removal.
The right film should be selected by metal finish first, then by the process route and removal period. When factories compare wholesale stainless steel protective film options, thickness alone is not enough. Mirror and BA stainless steel usually need low-to-medium tack with cleaner peel behavior because haze, adhesive trace, or ghosting is easy to see. Brushed, hairline, and No.4 stainless steel often need medium tack to prevent lifting during slitting, bending, punching, or folding.
For pre-coated metal, coating hardness, texture, and storage time affect the adhesion choice. A low-tack film may lift during roll forming, while excessive tack may leave marks after aging. For aluminum sheet and profile work, the film should protect a softer surface without creating removal stress. As a practical reference, 30-50 um is often used for light handling and short indoor storage, 50-80 um for appliance panels and general fabrication, and 80-120 um for heavier friction, forming, or longer shipment. Before batch production, a process trial should check whether the film tears, wrinkles, slides, or leaves residue after stretching.
Adhesion should follow surface finish, not thickness alone. Smooth BA and mirror stainless steel need cleaner low-to-medium tack because haze and peel marks are easy to see. Brushed, hairline, and No.4 stainless steel have directional texture, so the film must hold during slitting, bending, and stamping. Aluminum needs balanced adhesion, while textured pre-coated metal may need stronger tack during forming.
Item | Typical Range / Customizable Value |
Base Film | PE, LDPE, or co-extruded PE protective film |
Adhesive Type | Water-based acrylic, rubber adhesive, or process-matched adhesive |
Film Thickness | 30-120 um, heavier grade available for forming or long shipment |
180-Degree Peel Force | 20-250 g/25 mm, low, medium, or high tack by finish |
Roll Size | Width 40-2000 mm, length 100-3000 m, slit or jumbo roll |
Color / Printing | Clear, blue, white, black-white, custom color, logo, arrow mark |
Surface / Process Match | 2B, BA, mirror, brushed, hairline stainless steel, aluminum, coated metal, slitting, stamping, deep drawing, laser cutting |
Removal / Testing | Clean removal, residue control, aging test, UV exposure check, process trial |
As an aluminum sheet protective film factory, Films Protection Company can adjust structure, thickness, tack level, width, roll length, color, printing, winding direction, and slit tolerance. High-gloss stainless steel needs clean removal; textured or coated metal needs stronger edge holding.
Useful details include metal grade, finish, coating type, process steps, lamination speed, roll size, removal time, storage temperature, and sunlight exposure. These details help avoid excessive tack, weak edge holding, low stretch, or indoor-grade film used outdoors.
A standard metal protective film suits light handling, short storage, and general shipment, but forming and laser cutting need a more matched grade. During deep drawing or stamping, the film needs stretch, conformity, and adhesive stability to avoid tearing or sliding. For laser cutting, it should reduce cutting residue contamination and peel cleanly after processing.
It protects stainless steel, aluminum, pre-coated metal, appliance panels, and formed parts during slitting, bending, stamping, cutting, storage, shipment, and installation.
Sometimes. Stainless steel, aluminum, and coated metal have different gloss, hardness, surface energy, and residue sensitivity, so adhesion should be tested.
Choose adhesion by surface finish and removal period, then verify it with a 180-degree peel test, aging test, residue check, and UV exposure check.
Please confirm metal type, surface finish, coating, process steps, thickness, roll width, roll length, color, printing, tack level, removal time, storage temperature, and exposure.
