-
- Thickness: 100um / 0.1mm / approx. 4 mil
- Material: PET polyester film roll
- Color: Clear standard, other finishes on request
- Surface: Untreated, one-side corona, or two-side corona
- Roll format: Custom width, length, 76mm or 152mm core ID, roll OD
- Uses: Die-cutting, insulation parts, labels, adhesive coating, lamination
-
- Thickness:125um / 0.125mm / 5 mil
- Material:Biaxially oriented PET film
- Surface:Clear, matte, treated, or coating-ready
- Format:Roll, slit roll, or sheet
- Processing:Printing, lamination, punching, die cutting
- Use:Overlay, insulation, spacer, carrier layer
-
- Thickness: 250um / 0.25mm for rigid support parts
- Material: PET polyester film with insulating properties
- Color Options: Clear, translucent, milky white, black or custom color
- Surface: Smooth, flat surface with low-curl control
- Processing: Slitting, sheeting, punching, cutting and die-cutting
- Main Uses: Insulation gasket, spacer layer, washer and panel backing
-
- Material: PET polyester film with pressure-sensitive adhesive
- Typical film thickness: 25 / 36 / 50 / 75 / 100 microns
- Adhesive options: acrylic or silicone
- Color options: clear, blue, milky, matte black, or custom
- Supply form: log rolls, slit rolls, sheets, or die-cut pieces
- Common uses: insulation, masking, surface protection, lamination, and converting
-
- Material: PE film
- Adhesive: acrylic-based
- Colors: clear, blue, white, black & white
- Thickness: 30–80 mic typical
- Width: 1000–1500 mm common
- Use: processing to installation
-
- Material: clear PET / BOPET polyester film
- Color: transparent clear, light tint by request
- Thickness: 25-250um typical factory range
- Function: anti static surface charge control
- Supply form: slit roll or cut sheet
- Use: electronic, optical, and clean converting
-
- Material: PE / LDPE based anti-static film
- Appearance: clear or pink tinted
- Typical thickness: 1 mil to 6 mil
- Supply form: rolls, sheets, liners, tubing, bag stock
- Processing: heat sealable on suitable grades
- Main use: electronics packaging and clean handling
-
- Material: Chemical coated BOPET / PET film
- Color: Clear transparent
- Coating side: One-side, two-side, or coated plus corona treated
- Thickness: 12-250 um
- Supply form: Jumbo roll, slit roll, or sheet
- Uses: Printing, coating, lamination, metallizing, label stock
-
- Material: Clear PET polyester film
- Surface: Printable receiving coating
- Finish: Clear, semi-matte, or matte
- Thickness: 50um, 75um, 100um typical
- Roll Core: 3 inch or 6 inch core
- Use: Sublimation printing and transfer testing
-
- Material: Optical PET or flexible film structure
- Common thickness: 0.10 mm to 0.18 mm
- Color: Clear transparent
- Surface: Glossy, anti-scratch coating optional
- Adhesive: Silicone or pressure-sensitive adhesive
- Supply form: Roll, sheet, or die-cut pieces
-
- Material: printed self adhesive PVC film with release liner.
- Width: 600 mm, 900 mm, 1220 mm, or custom slit width.
- Length: 10 m, 25 m, 50 m, or project roll format.
- Finish: glossy, satin matte, or soft stone texture.
- Pattern: white grey, black gold, beige stone, or custom veining.
- Surface: dry, flat, sealed and non-porous counter surfaces.
-
- Material: PET film with double side silicone coating
- Typical Thickness: 25 um, 36 um, 50 um, 75 um, 100 um
- Color Options: Clear, milky white, blue, red, or matte finish
- Release Design: Equal release or differential release liner
- Common Width: 300-1600 mm, slit roll available
- Main Use: Tape, label stock, foam tape, and die-cut liner
-
- Common widths: 500 mm-1500 mm rolls
- Color options: blue, white, clear, black
- Base material: flame-retardant PE film
- Surface type: smooth or anti-slip embossed
- Thickness range: 80-1000 um
- Main use: temporary site surface covering
-
- Material: PE film with pressure-sensitive adhesive
- Thickness: 40–80 microns typical
- Width Range: 50–1240 mm
- Length Range: 100–500 m
- Colors: Clear, blue, translucent
- Suitable Surfaces: Float glass, tempered glass, laminated glass, mirror, and selected coated glass
-
- Material: Clear PET carrier
- Thickness: 50um, 75um, 100um
- Finish: Matte, semi-matte, glossy
- Peel type: Hot peel, cold peel
- Use: Textile logo transfer
- Supply: Rolls or sheets
-
- Common widths:24 in, 36 in, 48 in, or custom roll width
- Common length:200 ft per roll, custom length available
- Film material:PE / LDPE temporary closure film
- Adhesive:water-based acrylic adhesive, medium tack or high tack
- Color options:blue for visibility, clear for inspection
- Use area:open ductwork, air duct, vent opening, and HVAC fixture protection
-
- Material: PE film with removable adhesive
- Color: Black/white, transparent, blue, or printed
- Thickness: Typical 60-100 um
- Adhesion: 1.8-5.5 N/25 mm typical range
- Roll format: Slit rolls for sheet lamination
- Suitable surface: Stainless steel, coated metal, aluminum sheet
-
- Material: Clear PET film with non-silicone release coating
- Release side: Single side release surface
- Color: Transparent or light haze visual grade
- Thickness: 25 um, 36 um, 50 um, 75 um, 100 um
- Supply form: Clear release film roll or sheet supply
- Typical use: Electronics adhesive release liner, clean interleaf, transparent laminate support
-
- Product Type: Optical-grade OCA bonding film
- Adhesive Layer: Clear double sided adhesive layer
- Common Thickness: 50um, 100um, 125um, 175um, 250um
- Appearance: Transparent, low haze, high clarity
- Liner: PET release liner, easy release and tight release options
- Main Use: Display bonding, glass bonding, optical component assembly
-
- Material: PE film with pressure-sensitive adhesive
- Adhesion: Low tack, medium tack, or custom
- Color: Clear, blue, or milky translucent
- Thickness: Standard and custom options
- Width: Slit rolls and sheet sizes
- Use: Temporary screen protection
-
- Common roll width: 300 mm, 600 mm, 1000 mm, 1220 mm, 1650 mm
- Film thickness: 40 um-100 um
- Color options: Clear, blue, white, black-white, or printed marks
- Material: PE film with controlled hand-tear perforation
- Tear-off interval: 300 mm, 500 mm, 600 mm, 1000 mm, or custom
- Main use: Fast temporary covering for floors, counters, doors, windows, and duct openings
-
- Material: PET polyester film
- Thickness: custom industrial gauges
- Roll type: jumbo roll, master roll, slit roll
- Surface: untreated, single corona, double corona
- Finish: clear, white, black, matte, gloss
- Processing: slitting, rewinding, sheeting
-
- Material: APET / RPET
- Color: clear, translucent, tinted
- Surface: glossy, smooth
- Supply form: roll stock
- Thickness: custom production range
- Typical use: thermoforming and packaging conversion
-
- Material: PET material / polyester film
- Common thickness: 25 um-250 um
- Color: clear, matte, translucent, milky white
- Surface: untreated, corona treated, primer treated
- Processing: insulation, printing, lamination, die cutting
- Key properties: thermal stability, dimensional stability
-
- Material: PE surface protection film
- Adhesive: acrylic-based or rubber-based
- Color options: clear, blue, black/white, custom print
- Thickness range: 30–120 microns
- Roll width: up to 3200 mm
- Surface fit: gloss, matte, satin, and lightly textured coatings
-
- Material: PE protective film
- Adhesive: Acrylic pressure-sensitive adhesive
- Colors: Blue, clear, white, black/white
- Thickness: 40–100 microns
- Width: 25–1250 mm
- Surfaces: Anodized, powder-coated, painted, and smooth aluminium
-
- Material: PE film with removable adhesive
- Color: Clear, blue, white, black-white, or printed
- Thickness: 30-100 um, typical factory test range
- Adhesive: Low or medium tack pressure-sensitive adhesive
- Width: Custom slit width, +/-1 mm typical tolerance
- Surface Use: Stainless steel, PCM/VCM, glass, and plastic panels
-
- Material: PE or polyolefin forming-grade film
- Thickness: 50 um-100 um typical
- Color: Blue, clear, white, or black-white
- Adhesive: Removable acrylic or rubber-based adhesive
- Process: Deep drawing, stamping, forming
- Use: Metal sheet, appliance, automotive, kitchenware parts
-
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Thickness: 30–150 microns
- Colors: clear, blue, white, black-and-white
- Width: up to 2000 mm
- Surface fit: glossy, matte, textured, coated sheets
-
- Material:Red transparent PET film or red transparent PVC film
- Color Density:Light red, standard red, deep red, or sample-matched tone
- Thickness:PET 25 um – 250 um / PVC 100 um – 500 um typical
- Light Transmission:Light red 55% – 78% / deep red 18% – 45% typical
- Surface:Smooth roll surface for printing, lamination, slitting, or die-cutting
- Uses:Packaging window, lighting filter, display overlay, LED window, visual identification
-
- Common width: 1040 mm, 1270 mm, or custom slit width
- Material: PET, TPU, or multilayer functional film
- Surface: clear, matte, privacy, anti-glare, anti-fingerprint
- Supply type: jumbo roll, slit roll, converting roll stock
- Use range: phone, tablet, watch, laptop, display panel
- Processing: die cutting, plotter cutting, laser cutting
-
- Material: PE film
- Adhesive: removable self-adhesive coating
- Common Colors: blue, clear, printed
- Common Widths: 24 in, 36 in, 48 in, 600 mm
- Common Roll Lengths: 200 ft, 500 ft, custom
- Typical Use: temporary protection for sealed hard floors
-
- Material: PVC decorative vinyl with adhesive backing
- Finish: wood grain, matte, gloss, high gloss, solid color
- Width: 600mm, 1220mm, 1240mm, or custom
- Roll length: 30m, 50m, 100m, or bulk roll
- Surfaces: sealed MDF, laminated board, plywood, painted furniture panels
- Supply: roll, cut sheet, sample swatch, color-matched batch
-
- Crystal-Clear Transparency: Over 90% light transmission with minimal haze
- Advanced Silicone Adhesion: Removable cleanly without sticky residue
- High-Heat Stability: Withstands up to 150 °C (302 °F)
- Anti-Fog Functionality: Prevents hazing and clouding in humid conditions
- Simple Installation & Removal: Bubble-free application, easy to reposition
- Extra Protection Option: UV-blocking or anti-scratch coating available
-
- Material: PE or PET-based
- Color: Clear, blue, or milky white
- Adhesion: Low to medium tack
- Thickness: 30–100 microns
- Supply Form: Roll, sheet, slit roll, or die-cut
- Use Stage: Printing to final assembly
-
- Material: PE protective film
- Thickness: 30 / 40 / 50 / 60 / 80 microns
- Colors: Clear, blue, black & white
- Adhesion: Low, medium, or high
- Roll Width: Custom slit widths available
- Surface Finish: 2B, BA, mirror, brushed, No.4, hairline
-
- Material: PE protective film
- Color: Clear, blue, black & white
- Thickness: 40 / 50 / 60 / 70 / 80 microns
- Adhesive: Water-based acrylic
- Width: 100–1240 mm
- Surface Match: Gloss, semi-gloss, smooth, lightly textured
-
- Material: PE film with pressure-sensitive adhesive
- Thickness: 30 um-120 um, selected by process risk
- Width: 50 mm-1600 mm, custom slitting available
- Roll length: 100 m-1000 m, grade dependent
- Surfaces: coated metal, stainless steel, aluminum
- Use: fabrication, forming, assembly, stacking, internal transport
-
- Material: Coextruded PE protective film
- Adhesive: No adhesive, glue-free, non-glue structure
- Color: Clear, blue, milky white, black-white option
- Thickness: 30-150 um typical range
- Width: 300-2100 mm slit roll or jumbo roll
- Use: Smooth acrylic, PC, glass, PETG, PVC panels
-
- Material: PE-based removable protective film
- Color: Clear, blue, white or custom
- Thickness: 30-120 um typical range
- Width: 20-2200 mm customizable
- Adhesive: Acrylic or rubber-based pressure-sensitive adhesive
- Use: Plastic sheet and formed part protection
-
- Material: PET film
- Finish: clear gloss / matte / anti-glare
- Typical thickness: 100–250 microns
- Surface option: hard coat / anti-fingerprint
- Supply form: rolls, sheets, die-cut pieces
- Adhesive option: removable or application-matched adhesive
-
- Material: clear PET film
- Structure: PET with PSA
- Color: clear or light anti-glare
- Thickness: 25-125 um PET base
- Supply: rolls or slit rolls
- Use: printed and display surfaces
