Perforated Surface Protection Film
- Common roll width: 300 mm, 600 mm, 1000 mm, 1220 mm, 1650 mm
- Film thickness: 40 um-100 um
- Color options: Clear, blue, white, black-white, or printed marks
- Material: PE film with controlled hand-tear perforation
- Tear-off interval: 300 mm, 500 mm, 600 mm, 1000 mm, or custom
- Main use: Fast temporary covering for floors, counters, doors, windows, and duct openings
Films Protection Company is a manufacturer of perforated surface protection film for fixed-length tear-off use in construction, installation, and temporary covering work. This perforated roll is made with easy-tear perforation at 300 mm, 500 mm, 600 mm, 1000 mm, or custom tear-off interval. Each section separates by hand, helping workers reduce measuring, knife cutting, uneven trimming, and short offcuts from plain film rolls.
Product Overview
A pre-perforated protection film roll is useful when repeated covering work must move quickly. The film stays in roll form, but dotted tear lines give each piece a preset length on site. Workers pull to the next line, remove one sheet by hand, and apply it without extra measuring.
Typical thickness is 40 um-100 um, with 300 mm-1650 mm roll width and 50 m-1500 m roll length, depending on film grade, adhesive coating, and roll OD. For construction surface protection film, this format works on floor walkways, countertop edges, window frames, door panels, stair areas, cabinet fronts, and temporary duct openings.
A good easy-tear protective film roll separates smoothly along the perforation while staying stable during unwinding, carrying, dragging, and positioning. Film thickness, elongation, adhesive tack, roll tension, and perforation depth all affect this balance. Typical tensile strength is 18-35 MPa, and elongation at break is usually 180%-450%. Before bulk use, sample rolls should be checked for peel adhesion, residue, spacing accuracy, tear line stability, and sheet length consistency.
Benefits
- Fast hand separation: Sheets can be removed without measuring and cutting every piece.
- Consistent preset length: Typical sheet length tolerance is around +/-3 mm to +/-8 mm.
- Less trimming waste: Fixed-length tear-off protection film reduces random offcuts from manual cutting.
- Stable hand-tear line: The perforation separates cleanly without weakening the roll during normal unwinding.
- Flexible spacing: 300 mm, 500 mm, 600 mm, 1000 mm, or custom intervals can be selected.
- Cleaner temporary use: Low, medium, or high tack adhesive can be checked with a 24-72 h residue test.
How does easy-tear perforation make jobsite surface protection faster than cutting from a plain roll?
Easy-tear perforation changes the roll from material that must be cut into a controlled tear-off system. Workers do not need to measure every section, carry a blade, or trim uneven edges after placement. They pull the film to the next tear line and separate one sheet by hand. The perforation should be deep enough for smooth tearing, but stable enough to avoid early breakage during unwinding, carrying, dragging, or positioning.
TDS
Item | Typical Value |
Product type | Perforated PE surface protection film roll |
Roll format | Continuous roll with fixed easy-tear perforation |
Film thickness | 40 um-100 um, custom grade available |
Standard roll width | 300 mm-1650 mm |
Roll length | 50 m-1500 m, depending on thickness and roll OD |
Tear-off interval | 300 mm, 500 mm, 600 mm, 1000 mm, or custom |
Pre-perforated sheet length tolerance | Typical +/-3 mm to +/-8 mm after tension control |
Perforation type | Easy-tear or standard-tear perforation |
Tear line stability | Hand tear along line, no premature break during normal unwinding |
Adhesive tack | Low, medium, or high tack removable adhesive |
Peel adhesion reference | 80-450 g/25 mm, surface dependent |
Tensile strength | Typical 18-35 MPa by film grade |
Elongation at break | Typical 180%-450% |
Residue observation | 24-72 h sample check recommended before bulk use |
Suitable surfaces | Floor, carpet, countertop, glass, door panel, coated metal, temporary duct opening |
Application temperature | 10 C-40 C recommended |
Sample validation | Check adhesion, tear-off interval, tear line, residue, and sheet length before production use |
Applications
- Floor and walkway protection during construction, renovation, painting, or finishing work
- Countertop, cabinet, and workbench covering using repeated 500 mm, 600 mm, or 1000 mm lengths
- Window and door protection during installation, transport, interior work, or final cleaning
- For repeated maintenance of booth windows, the spray booth viewing window film replacement guide explains when fixed tear lengths may help and what must still be tested on the actual transparent surface.
- Carpeted stair and corridor protection where 300 mm or 600 mm spacing improves placement speed
- Temporary HVAC duct opening coverage during storage, installation, or dust-control work
- Painted panels, coated profiles, appliance surfaces, and metal parts needing short-term covering
Which tear-off interval should be selected for pre-perforated sheet length control?
The tear-off interval should match surface size and handling method. A 300 mm or 500 mm interval suits narrow frames, door edges, countertop corners, and small fixture areas. A 600 mm interval often works for stair sections, cabinet fronts, carpet protection, and temporary duct opening coverage. A 1000 mm or longer pre-perforated sheet length is better for open floor areas and wider countertop protection. The spacing should be tested under real unwinding tension because roll tension can affect sheet length tolerance and tear line behavior.
production line
loading containers
FAQ
Q1: Is this film supplied as a perforated roll?
Yes. This perforated surface protection film is supplied as a perforated roll with fixed tear-off lines for hand separation.
Q2: Can the tear-off interval be customized?
Yes. Common intervals include 300 mm, 500 mm, 600 mm, and 1000 mm, with custom spacing available.
Q3: Will easy-tear perforation weaken the whole roll?
It should not when perforation depth, film thickness, elongation, and roll tension are controlled correctly.
Q4: How should residue risk be checked?
A 24-72 h sample test is recommended on the actual surface before bulk use.
